Description

Since several years i cant hold my hands still - so i did start to change this setup again :)

Most of the parts are already bought and gathered together over the past 5 years. I wanted a little challenge,(i was building in atx or bigger cases/serverracks the past 10 years. i got rid of the CM mastercase 5t which is about double the size of the h200i.

Watercooling:

There is still much to do! I got the norprne 13/10 tubes, which look preety good imo. The cooling performance of the Ek CPU/GPU blocks are good as they used to be in the past + the looks are on pint too. currently i have the pump/res-combo mounted on the rad (mora 360 + fast disconectors) which will change soon (looking for a new pump/res-combo.

the build will be a work i progress - like all of my builds ^

@mod: more Pics and description will follow :)

Part Reviews

CPU

Bang for the buck - got it for 150$ + Division 2 Oc'd to 4.3 on all cores with 1.3V- not the best cpu, but ok - heats up to max 55 degrees.

Motherboard

The Hardware:

MOBO: B450 I Aourus ProPretty nice lookin B450 board. it does it's job pretty well.

Memory

RAM: The vengeance 2 by 8GbB kit is running at 3200 CL16 - no RGB needed

Storage

pretty expensive at the time.

Storage

budget SSD - does it job

Video Card

GPU: Well- what can i say about this piece of tech - it runs extremely good for a 64 - (1700/1100Mhz). Max temp i had was under 50 degrees in the summer with 30 degrees roomtemperature. Imean i was running hottter for sure :D

Case

Case(fans): love the looks of the H200i. Clean looks and more space for the cablemanagement then i thought is given. replaced the original fans with the af 120's and put em in the front.

Case Fan

Love the design/performance - no signs of age after 5 years of using.

Monitor

Imo the best ~24" 144hz sva-panel for the money at the moment.

Comments

  • 8 months ago
  • 2 points

nice build :)

have you had any problems with dead pixels on the monitor? A lot of amazon reviews say they have experienced 1 dead pixel on the monitor within the first couple of weeks, and i was thinking about buying this monitor. Thanks in advance

  • 8 months ago
  • 1 point

thanks! :)

no its perfectly fine - no dead pixels or other failures.

  • 8 months ago
  • 2 points

Gotta love a good MORA3 build.

  • 8 months ago
  • 1 point

Mora is Life <3

  • 8 months ago
  • 2 points

More pics?

  • 8 months ago
  • 2 points

Haven't seen a build with the pump/res on the outside of the case, it does clear things up quite a bit! +1

  • 8 months ago
  • 1 point

thanks, yeah i like the looks of it too and the other thing is that this pumpcombo is total crap in terms of mounting ^

as i said im looking forward to get a new one anyways :)

  • 8 months ago
  • 1 point

Thank god you didn't put a Ryzen7 at 1.3v on this board.

  • 8 months ago
  • 1 point

because? VRM's arent running hot at all, or what do you wanna tell me? ^

  • 8 months ago
  • 1 point

Sure, skip to 8:30 if you don't want to watch the whole thing. That is where Buildzoid talks about B450 VRM's. https://www.youtube.com/watch?v=lVtRJCyU6D4&t=1414s

  • 8 months ago
  • 1 point

Buildzoid is know to "make VRM's look worse" my board has the IR3556 mosfet - which is more then enough for the 6c/12t ryzen with 1.3V

  • 8 months ago
  • 1 point

I just did something similar, but I got the mo-ra3 420 with a pcie passthrough from my define S2. I would love to do a ITX case like this, but they need to make at least a 3slot pcie case. Im using everything by watercool. I fashioned together ball valve connectors as a quick disconnect as to not impede flow.

  • 8 months ago
  • 1 point

nice :) id like to see it :)

Flow isnt really affected by the quick disconectors - at least in my case :)

  • 8 months ago
  • 1 point

Right, its not something that's to big of a deal depending on setup. One user used 4 pairs of QDC and a filter and got a pretty significant reduction in flow, but it only resulted in a 3c difference.

Im using the heatkiller pump/res combo with the heatkiller tube adapter to mount the pump/res to the rad. I highly recommend it.

[comment deleted by staff]
  • 8 months ago
  • 1 point

you cant see it very well : ill upload some more pictures later on!

Pump- CPU - GPU - External Radiator - Pump :)