Description

Great PC, not much else to say.

Destroys all games, and works wonders for Vms.

Overkill for what I need, but that 7zip compression speed is amazing..

More and better photos: https://photos.app.goo.gl/1S1cipDl8ad8ZGoJ2

Comments

  • 22 months ago
  • 6 points

supremacy is very correct. amazing build dude +22

  • 22 months ago
  • 3 points

I was going to call it white supremacy because of the fluid color, and the water block being the ek supremacy.

But I was told by many people that is a bad name(for what ever reason :P). So I've just settled on supremacy.

  • 22 months ago
  • 1 point

Lololololol. I can see why you didnt use that one. Overall a freaking amazing build. Love it!

  • 9 months ago
  • 0 points

"white supremacy" is a bad name because it basically says white people are supremer than non white people, and that's racist

  • 22 months ago
  • 4 points

You have the wrong PSU, RAM and Graphics Card.

Ram should be this.

PSU should be this.

Graphics Cards should be this.

  • 22 months ago
  • 1 point

Just to point out, the vengeance rgb would make his performance worse because of low frequency

  • 22 months ago
  • 1 point

They have higher frequency kits, I just couldn't find them.

  • 22 months ago
  • 1 point

Correct me if I’m wrong but that CPU only supports up to DDR4-2666, so that’s what he should buy so he doesn’t waste an extra money, right?

  • 22 months ago
  • 2 points

XMP allows you to overclock ram to its specified frequencies. For example if he had bought a 3200mhz kit it would run 2666mhz out of the box. But by going into his bios and enabling xmp the ram would overclock to 3200mhz.

  • 22 months ago
  • 1 point

Hi just mentioned this to you on another post...But just to make sure, its not the CPU support speed that matters, that is just an Intel support rating of gauranteed to run at 2666MHz...The Ram manufacturers provide higher rated speed RAM which hapily works all the way beyond 4000MHz...otherwise as you were saying, why buy RAM at speeds of over 2666MHz..its becouse they will work at there rated speed be it 2666, 3000, 3200 and all the way to 4000MHz plus.

I have a 8600K with 3000MHz DDR4 ram at it runs hapiliy at 3000MHz. All you have to do is go into the BIOS and run the XMP profie...

  • 22 months ago
  • 1 point

few things were swapped around since I put together the parts list.

Couldn't get the EVGA cards so I can to make do with the strix cards, will update the list on that.

Ram is still coming, current ram in photos is just temp from old build, g.skill is very hard to get in my country.

Power supply is correct, but I'm unsure if I want to switch I have both. Thinking of painting one white.

[comment deleted by staff]
  • 22 months ago
  • 4 points

no sub is saying they put the incorrect parts on the online build not that they should have got this or that.

  • 22 months ago
  • 3 points

Thank you.

  • 22 months ago
  • 1 point

lol

[comment deleted by staff]
  • 22 months ago
  • 1 point

you get a plus one for making me laugh surefir3

  • 22 months ago
  • 2 points

I am saying the OP put in the wrong parts in the part list. The pictures don't match the ones in the part list.

[comment deleted by staff]
  • 22 months ago
  • 1 point

Infinity Inwin case has absolutely terrible airflow and doesn't have anywhere near the build quality of the 909 Silver. The storage is ssd which would make 3 TB another $1,000 easy.

  • 22 months ago
  • 2 points

I've actually got a SSD NAS with 5 1tb SSDs, and 2 4tb HDDs.

So local storage wasn't something I was considering.

  • 22 months ago
  • 1 point

The 805 Was too small, and thats one tb of local SSD storage.

I have both a NAS and unlimited storage with google drive. So local storage wasn't the top of my list as far as parts go.

[comment deleted by staff]
  • 22 months ago
  • 3 points

Very clean. Only thing that might make it better is the Asus RGB sli bridge.

  • 22 months ago
  • 1 point

I intend to get a custom cover for my current one.

Hate the looks of the asus and evga HB ones.

  • 22 months ago
  • 1 point

That will look very nice.

[comment deleted by staff]
  • 22 months ago
  • 2 points

Adopt me please!

  • 22 months ago
  • 1 point

Only 17, doubt my parents would allow me.

  • 22 months ago
  • 1 point

We could make it work. :0

  • 22 months ago
  • 2 points

This is an extremely beautiful and clean build with lots going on!!! That case it AMAZING!! The loop and radiators are very well put together. and once again....THAT CASE!!! +1

[comment deleted by staff]
  • 22 months ago
  • 2 points

Gee thanx for fixing my phone auto correct

[comment deleted by staff]
  • 22 months ago
  • 2 points

Is it a dual loop?

Very very nice build btw. Just love that case! +1

  • 22 months ago
  • 2 points

Okay, I dont care...but thats the dog's you know what....Fantastic beast of a system....I want one.

  • 22 months ago
  • 1 point

Holy **** this is beautiful

  • 22 months ago
  • 1 point

One of the most amazing builds ever.
CM to end all CM.

  • 22 months ago
  • 1 point

Looks good!

  • 22 months ago
  • 1 point

I saw the first pic and thought the PC case was cut and mounted into the wall and i was like

"Dammnn"

  • 22 months ago
  • 1 point

Jesus christ... actual overkill... But still nice.

(also who uses an i9 for gaming)

  • 22 months ago
  • 1 point

No one should, but this isn't just for gaming.

Mainly for working with VMs and 3d modeling.

Some times even 3d modeling in VMs

  • 22 months ago
  • 1 point

Wow beautiful. I just built my new machine with a 7820X and I think it is amazing. This just blows my build out of the water.

  • 22 months ago
  • 1 point

Looking good until I see the bridge... Yikes, cover that thing, it's nasty.

  • 22 months ago
  • 1 point

I quite like it, though I am getting a custom cover made.

  • 22 months ago
  • 1 point

didn't realize i was on techsource's youtube.

  • 22 months ago
  • 1 point

Hmm? sorry I don't get that reference.

  • 22 months ago
  • 1 point

My biggest concern would be choking off the airflow to the front 120mm fan on the bottom radiator with it in pull and that close to the front rad. But as long as your thermals are all in check, it's all good.

Finding it really hard to find a good case to do 1x360 and 1x480 rad in that isn't the size of a mini-fridge. Closest option I have right now I'm working with is the DBPro 900 where I can do 1x360 + 1x420. May consider some other cases where I can do dual 240s like this to get the full 480 rads for my GPUs.

  • 22 months ago
  • 1 point

I think I can easily see this being featured for its sheer power, simplicity, and effectiveness. The only thing holding it back is the parts list

  • 22 months ago
  • 1 point

I know at least one person is gonna be offended by this build. The build is white and its called Supremacy.

  • 22 months ago
  • 2 points

Water block is the EK supremacy, though its original name was white supremacy.

Named after the waterblock and fluid color, not the movement.

  • 22 months ago
  • 1 point

This is actually the best build I've seen on this site in a long time, but that might just be because I haven't seen this site in months. +1

EDIT: People should really stop complaining about things that you did wrong in your build. It's an overall great build!

  • 22 months ago
  • 1 point

A work of art +1

  • 22 months ago
  • 1 point

Well done! +1

  • 20 months ago
  • 1 point

awesome build, I am real tempted to build this rig too. what plates did you use for the graphics cards?

  • 20 months ago
  • 1 point

stock backplates, and just EKs standard waterblocks.

have to use a drill press to attach the stock backplates to the ek waterblocks though

  • 14 months ago
  • 1 point

how many frames do you see averagely

  • 14 months ago
  • 1 point

depends on what game, currently I'm getting 23-27 on stellaris

  • 14 days ago
  • 1 point

sexeh.....

[comment deleted]
[comment deleted by staff]
  • 22 months ago
  • 1 point

Why? Because its expensive?

Your Ncase rig is much cooler, and I honestly wish I had something like that, but the small just didn't fit my needs.

If I could some how cool a OC'd 7980xe with a 120mm rad your build would of been exactly the type of build I wanted.

[comment deleted by staff]
  • 22 months ago
  • 1 point

I didn't even see the one above the 24pin, moved now. It was to my led strip, keeps falling down.

Also the cabled under the res are from my GPU to my displays, and also my keyboard and mouse from my mobo. Not much I can do sadly, case is very odd as the I/O is inside a compartment of the case rather than at the back.