$35.99 CAD (Purchased)
Damn, that is clean. Great job! +1
Thanks man! Love the black n red theme with yours. Super clean!
Thanks, man! I appreciate it! :)
Very nice! +1
How much did the system cost in total?
Thanks! before taxes the system its self was $1700
very clean !!!! cant wait for a free weekend to tidy my setup up . awesome job. you inspired me for this nex itx build to go full blackout!!
Thanks man! glad to know I've inspired someone. That's a beastly build you've got there.. love the all white!
Beautiful build. Very clean. Well done!
Nice build! Just doesn't seem like the GPU has much room to breathe haha
Wondering how do like those PEBBLE speakers, being that you DJ i guess? Real nice & clean set up.
Thanks! for $30 the speakers are actually decent, definitely not going to have a party with these but you do actually get some slight low end. I've got a neighbor on the other side of the wall so If I really need to listen I'm on headphones. I really like the aesthetic minimal look of the speakers and the way they are directed upwards, towards your ears. But if you're not in my situation I would go for a nice pair of studio monitors.
I actually bought 2 MSI MAGCQ27, good monitors still fine tuning for gaming. I have an Ikea hack.
Nice, would love to check your setup out. I love Ikea hacks haha
It's up if you want to check it out.
That's a sick build, Not gonna lie
Could you upload a picture of your 3.5 drive please? :) I'm looking at getting this case with a 280 rad to fit a 3.5 drive but not sure if it will fit!
Posted and forgot! You got the h200 and not the h200i! Do you have a fan hub for your pump + fans?
Sure! I think if you get a 280 rad you would still be able to fit a 3.5 drive. Going based off NZXT coolers the x52 and x62 are the same thickness. The only issue would be the height but I have seen videos of people fitting a 280 rad into the h200. As long as your not planning to go push/pull the drive will fit.
The x52 includes a fan splitter with 4 slots, so I actually have 2 more slots open on the splitter, which I believe is for running push/pull. Only had to use the one cpu fan header on the motherboard. My case fans are plugged into the 2 other headers on the mobo.
Agh awesome! Thanks man! Can't wait to make a build like yours!
Not too shabby :) great.clesn setup too and like the dual workstation!
How’s that i5 and 2060 treating you? I have the same i5 and I was looking to upgrade my gpu to a 2060.
Highly recommend it. They've been great esp for 1440 plus you get a free game if you pick up an RTX card right now.
how did you install the hard disk ?
It's mounted with screws in the basement, right beside the rad. I'll have some pics up soon.
How are the temps on the gpu? Im looking to get the same case and gpu and am worried about the heat build up as there is very little clearance for the 2060.
Also, how are the noise levels on the dual windforce fans?
Appreciate a response :D
Temps are ok. On load its around 71 - 76 depending on what game I'm playing. If you go with an sfx power supply you'll prob drop in temps a bit since you'll have more airflow with the perforations on the shroud and bottom of the case. The fans do ramp up quite loud during game play but a headset can easily fix that. No regrets here!
Nice build. Can this board boot Windows from the m.2?
Awesome build! I’m working on a very similar one, just curious how was the ram clearance with the x52? Did you have any issues with the AIO and the ram slots?
No issues, the AIO will touch your ram so just install your ram first. If you want to avoid that you can always put it the cpu mount cooler sidways but I personally wouldn't be able to stand having the nzxt logo sideways.
hi have you done any read write benchmarks on the xpg sx8200pro?
How much space is there inbetween your gpu and aio? Looking to get a card thats 12mm longer than yours and I think it'll fit but it's gonna be really close.
How are temps?
Late message here, how happy are you with the EZDIY cable extensions? Did it make it much more difficult for cable management? Are they working reliably, no issues with power?
Haven't been on here for a while so sorry for the late reply. They work absolutely fine. It did make cable management a bit harder. But all worth it for the aesthetics. I'd go with a modular psu for sure.
Did the ram fit fine with the NZXT cooler? I thought the gskill ram was taller than the height restriction of that cooler and the ram placement on the motherboard.
Yes, the ram fits. It is a bit taller and the tubes are slightly touching, just make sure you put the ram in first before the cooler. It will make the installation process easier. Haven't had to remove the ram yet. Crossing fingers I won't have to.
Monitor is dope, super smooth. Best bang for your buck if you're looking for an ultrawide monitor with curve, 100hz, and 3440x1440. Theres also freesync.
Only cons is you have to find an adapter to Vesa Mount it. I found one from a third party seller on etsy. Also there are some people that complain it makes a slight crackle noise every now and then. I've actually heard it but it doesn't bother me at all. They think its from the VA panel heating up, I have no idea though.
I have a MSI 27in monitor and it cracks too! It was driving me nuts. Feel better knowing its not only me