Description

built this pc out of spare parts i had for a friend who wanted a pc for music creation had to buy the case the comrade was the cheapest windowed case i found

Comments

  • 59 months ago
  • 7 points

Good build, but you might want some more memory for integrated GPU. +1

  • 59 months ago
  • 1 point

Bad pics and A10s are just useless. But maybe this was cheap.

  • 59 months ago
  • 1 point

So freakin shaky

  • 59 months ago
  • 1 point

U call ASUS 188X-pro spare?...how rich are you?

  • 59 months ago
  • 1 point

For an APU you need a fast RAM, i would suggest 8GB 2133 (and you will use a lot more of that APU than now)

  • 59 months ago
  • 1 point

Nice potato +1

  • 54 months ago
  • 0 points

Good Potato, Nice Potato Such WOOW

  • 59 months ago
  • 1 point

Might want a larger HDD

  • 59 months ago
  • 1 point

can someone help me? will this case be able to fit 2-3 gtx 980's in it?

  • 59 months ago
  • 1 point

If you can get 2-3 gtx 980's might aswell get a better case. I dont think it will fit them, depends on your motherboard aswell though.

  • 51 months ago
  • 1 point

Has your friend since added a dedicated GPU to this system? If so, how does the Zalman cooler on the 7850K perform? I am asking because my stock cooler sounds like a jet engine after adding a GPU to my build.

  • 50 months ago
  • 1 point

sorry for delay only just see this ,that zalman cooler is great for the money i got it in another pc too on a a8 6600k and thats paired with a r9 280x i also bought the next one up for another build thats really big and cost the same as the evo but twice the size both i would recommend

  • 50 months ago
  • 1 point

Thanks for the reply. I bought the cooler and unfortunately it does not fit my rig because MSI decided to put the CPU socket way too close to the PCI-E slot. The lock down clamps on the cooler are too big and my GPU gets in the way. :(

  • 50 months ago
  • 1 point

Oh. Forgot to ask if yours was rough at the base. My cooler came with rough heat pipes at the base. When I placed it on an even surface it was a little wobbly.

  • 50 months ago
  • 1 point

cant remember any problems with the base. you have a mini itx board so things will be tight but im suprised it wont fit did you remove the graphics card then fit the cooler an then refit the gpu

  • 50 months ago
  • 1 point

http://www.amazon.co.uk/Zalman-CNPS8900-Quiet-Performance-Technology/dp/B0077POH8M

http://www.novatech.co.uk/products/components/cooling/cpucoolers/multicpucoolers/scsk-1100.html

http://www.tomshardware.co.uk/low-profile-heat-sink-mini-itx,review-32826-19.html

theres a couple of coolers that might better suit your motherboard and a link to a toms post about small case coolers but i cant be sure they will offer any more clearance than the one you bought im sure that must fit its the same latch the stock cooler uses

  • 50 months ago
  • 1 point

Does this case have any space behind the Motherboard ray for cable management purposes?

  • 48 months ago
  • 1 point

yes but not much its a budget case

  • 48 months ago
  • 1 point

Alright thanks!

  • 59 months ago
  • 0 points

Used to have the Comrade

[comment deleted by staff]
  • 59 months ago
  • 1 point

There's always that one twelvie

  • 59 months ago
  • 0 points

14/10 - IGN