Description

Works well, used mostly for gaming and a little bit of programming. First try at making a custom shroud and back-plate. turned out fairly well. The fans at the bottom of the case intake air and the cutout on the side of the psu shroud directs the air to the GPU as it is very close (1 cm clearance) to the side window. With the fans supply air the GPU stays at about 60c under gaming loads at 2ghz. CPU is running at 3.8ghz with 1.3v and the ram is at 3200mhz 16/15/15 at 1.25v.

Log in to rate comments or to post a comment.

Comments

  • 31 months ago
  • 1 point

Nice one.

  • 31 months ago
  • 1 point

Thanks, you should check out the updated pics :)

  • 31 months ago
  • 1 point

flip the 2 bottom fans around to intake air.

  • 31 months ago
  • 1 point

Done now in finished build :)

  • 31 months ago
  • 1 point

Any reason you put the Radiator top right not top left? Is there a clearance issue with the ram sticks? or simply prefered it there?

  • 31 months ago
  • 1 point

The rad is there mostly to help manage the tubes coming out of the kraken. With the rad over to the left more they interfere with the gpu.

  • 31 months ago
  • 0 points

Im pretty new to this, but isnt 4.5tb a but overkill on the storage?

  • 31 months ago
  • 1 point

It really depends on your uses and what you are storing... I have a 2tb drive that used to be a lot... But now there is only like 300 gigas free...

  • 31 months ago
  • 0 points

It adds up quickly thou...