Description

Back at it again completely reworked the Loop and put in 1080ti's replacing the 1080s added a few more other items but it is all there. I know its a Caselabs knock off but for the price it can't be beat. I really would have liked to go with a Caselabs STH10 but at the time it wasn't fully available and I just bought what I could at the time. The middle piece with the Temp sensors and Fan Controller in a spare drive cage I found on Amazon. I know Red and Black builds are very common. I wanted to switch to Green and Yellow but switching colors on all the fans and fittings were going to cost way too much. I saved up a quite a bit for this build because I wanted to create a build that was just complete over kill but done to my own liking and make it my own. a lot of people compare my build to Jay's Skunkworks build but for my rig I went beyond what he had and I actually got inspired by another PC enthusiast who had a Caselabs STH10 build with 4 x 1080's and a CRAZY amount of cooling. The loop is built as one big loop with 2 D5 pumps and 4 radiators to keep all the components cool. The system has 3 Drain ports to make it easier to maintain.

Below is a build log video and full specs I hope you guys enjoy the build

Build log Video https://www.youtube.com/watch?v=gJQWrsieFHo

Full Specs some of it was tough to track down in the parts list

Thermaltake WP100 Intel I7 5930k MSI X99a Gaming 7 Motherboard 32Gbs of Corsair Dominator Platinums 3200MHz MSI GTX 1080ti FE Gigabyte GTX 1080ti FE EVGA HB SLI Bridge Corsair AX1200i 1 x Samsung 950Pro 512 GB NVMe 1 x San Disk 480GB SSD 1 x Corsair 500GB SSD 1 x San Disk 980 GB SSD 2 x 3TB Seagate 3.5 HHD 2 X 1TB HSGT 2.5 HHD

Cooling 24 x Corsair SP and AF 120 and 140MM Fans 1 x HardwareLabs 480mm Radiators 1 x HardwareLabs 480mm Radiators 1 x HardwareLabs 360mm Radiator 1 X XSPC 560mm Radiator a Mix of Primochill, EK, Bitspower, XSPC, AlphaCool fittings Bitspower MonoBlock for the CPU and Motherboard 2 x EK Titan Xp Waterblocks 2 x D5 pumps with Swiftech mounts 2 x Phobya 250mm Reservoirs Mayhems Red Coolant

Misc: XSPC LCD Temp sensors Thermaltake RGB Fancontroller

Log in to rate comments or to post a comment.

Comments

  • 30 months ago
  • 4 points

"Let them fight!"

VS the consoles

  • 30 months ago
  • 3 points

Impressive build, looks great!

  • 30 months ago
  • 1 point

Thank you

  • 30 months ago
  • 3 points

Wow. Amazing build. Good pictures. Custom loop. All you need is a more intricate description and you'll be featured. And I hope that this build gets featured. +1

  • 30 months ago
  • 1 point

I will do that and thank you!

  • 30 months ago
  • 2 points

You put 1080 FEs in the list, but you used 1080ti FEs. Maybe I'm missing something, but I think that's a mistake.? Great build tho!

  • 30 months ago
  • 1 point

Yeah. I bet that is a mistake. I've seen people do the same thing with 980s and 980 Ti's.

  • 30 months ago
  • 1 point

Yeah I am going to fix that. I thought I had choose the right ones because the price was way to high to be just 1080s lol

  • 30 months ago
  • 2 points

+1 I'm speechless... It's beautiful

  • 30 months ago
  • 2 points

What's that box in the middle of your PC? Looks awesome.

This is a very awesome looking build. One of the better ones in my opinion. Inspires me to get an over-sized case and simply stuff it full of fans!

  • 30 months ago
  • 2 points

It is a spare Drive cage I found on Amazon. I put the temp sensors and a fan controller in it. and Thank you!

  • 30 months ago
  • 2 points

Very cool build!

  • 30 months ago
  • 2 points

CEMR and great build +1

  • 13 months ago
  • 2 points

Man, I just noticed you modded the rgb on the front from blue to red. Was that something you can do by default or did you change the rgb strips there? That's actually a really cool idea.

Do you have fans on the right side? And if so, are they intake or exhaust?

I'm in the progress of building in this case now.

  • 2 months ago
  • 2 points

hmm That is strange my LED in the front came red? I didn't get a Blue one. I am going to be switching to the Bykski RGB because it will power up my new CPU blocks on my new build. so I have a 360mm rad in front as intake, The top 480mm radiator is exhaust also sorry for the super late response it has been a long time since I logged in

here is a video of what the build looks like now

https://www.youtube.com/watch?v=Tzq-CvmVvCg

  • 30 months ago
  • 1 point

Too red.

  • 30 months ago
  • 1 point

Yeah I actually wanted to do Green but I had already invested too much in Red from my last build.

  • 30 months ago
  • 1 point

I have update the parts list so it reflects my 1080ti's not the regular 1080s

  • 26 months ago
  • 1 point

isn't that the wp100/200? and not the w100?

  • 21 months ago
  • 2 points

Sorry I haven't been on here in a while it is the WP100. PC part picker at the time didn't have the option to let me choose both since the W100 and P100 are sold separately

  • 8 months ago
  • 1 point

Hey do you mind listing where each of your radiators are in your case (i.e. top, front bottom, p100-left, p100-right, etc.)?

I'm interesting in adding another radiator to my build and your build is a great help. Thanks!

  • 2 months ago
  • 2 points

Hey sorry I haven't been on here in quite some time the top of the W100 has a 480mm on the top, a 360mm in the front, 560mm in the bottom P100. it used to have a 480mm in there as well but it was difficult when it came to maintenance so I took it out. I just finished another Build if you want to check it out https://www.youtube.com/watch?v=Tzq-CvmVvCg

[comment deleted by staff]
  • 30 months ago
  • 1 point

Thank you!

[comment deleted by staff]