PCPartPicker
  • Log In
  • Register

Build

Toxic Manta

by Merisal

87
45 Comments

Permalink

Part List View full price breakdown

Details

Date Published

March 10, 2018

Date Built

Feb. 23, 2018

CPU Clock Rate

3.6 GHz

CPU Temperature While Idle

33.0° C

CPU Temperature Under Load

54.0° C

GPU Core Clock Rate

1.632 GHz

GPU Effective Memory Clock Rate

8 GHz

GPU Temperature While Idle

34.0° C

GPU Temperature Under Load

69.0° C

Description

Featured build... Wow thanks! :D much appreciated

About a year ago I posted my Red Dragon build. Today I present my new build. I named it Toxic Manta.

Even last year I thought about a miniITX build but due to several reasons I decided to use a ATX board instead.

The base for this build is the NZXT Manta case in black. It is more subtle than a white one and red wasn't my color of choice this time.

The cables are made by myself again. I used sleeve from MDPC-X and some other stuff like the connectors and cable combs from Gosumodz.

The first pictures shows a Cryorig C1 as CPU cooler. I changed it to a NZXT Kraken X52 rev2 ;)

Comments Sorted by:

Wolklung 3 points 9 months ago

Those cables have come up very nice. Looks heaps better with the x52. Great build.

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

Thanks. :)

Yes the X52 looks better and isn't that dominant.

Permalink
DaMysteryMan 1 Build 2 points 9 months ago

Very nice! Love the custom cable sleeving!

Permalink
04vkrivor 2 points 9 months ago

11/10

Permalink
Gooberdad 10 Builds 2 points 9 months ago

Very nice. Great looking pc.

Thumbs up and congrats on the featured spot!

Permalink
pcp1989 1 Build 2 points 9 months ago

beautiful build i really like the watercooler it looks amazing and really brings your build together imo a good choice to swap the cryorig out..def a +1 from me:)

Permalink
Merisal submitter 3 Builds 2 points 9 months ago

Thanks! :) I wasn't sure about using an aio watercooling system but it was a good choice especially for the aesthetic of the build

Permalink
pcp1989 1 Build 1 point 9 months ago

def good choice looks super sleek and just fresh looking compared to that big fan cooler(cryorig i think) sorry dont have it pulled up atm now that said the c ryorig pics dont look bad at all thats def a pretty nice looking cooler and i actually like how the fan was facing outside the case but that watercooler look...wow very nice i just wish i could afford one for mine lol also ty for your other replies about the logos and the desk appreciate brother +1 +1 :)

Permalink
pcp1989 1 Build 1 point 9 months ago

also whats that desk called? im looking for one for my new build and i really like yours ands i think itd be big enough for my setup..if you dont know its all good my man but whered you get that ryzen sticker mine only came with a stamp sized little thing that even if i put somewhere youd have to squint to see lol

Permalink
Merisal submitter 3 Builds 2 points 9 months ago

The desk is the IKEA Karlby walnut countertop and the ALEX drawer and cubicle. The countertop is 186cm wide so a lot of place :)

You mean the Ryzen logo at the right? This is a SSD cover I bought at ColdZero The Strix Logo below that is a SSD cover as well.

Fun fact: ordering the SSD cover in Portugal was cheaper than ordering them in Germany including shipping costs :D

Permalink
Apielo 2 points 9 months ago

Nice build the cables and parts all look great just sucks that you got your 1070 at what i got my 1070 ti at. I know the 1070 ti might not be worth the extra money but it was the same price as a 1070 for a bit of a performance boost so i couldn't pass it up but great job on the build and the feature.

Permalink
Nerdatron_of_Pi 2 points 9 months ago

This is flippin amazing

Permalink
mattravenmore 1 point 9 months ago

love the desk setup! awesome man!

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

Thank you :D

The room is still in progress ^ All in all I like a clean setup and it is strange how much space a keyboard, mouse and computer case can take on a nearly 2 meter wide desk xD

Permalink
beardedmisfit 1 Build 1 point 9 months ago

Congrats on the feature. Nice build! Love what you did with the Ryzen box I'm assuming. And the cable management is spot on! Great job

Permalink
Berend1453536775435775544 1 point 9 months ago

what's the monitor?

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

It is the LG 34UC88-B ultrawide monitor

Permalink
Berend1453536775435775544 1 point 9 months ago

thx

Permalink
AsianPartPicker 1 point 9 months ago

Loving it! :o. Beautiful desk, may I ask what it is?

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

IKEA Karlby walnut countertop and ALEX drawer. The most used desk combo at the moment I think :o)

Permalink
AsianPartPicker 1 point 9 months ago

Is the desk wide enough to accommodate a dual monitor setup?

25" and 27"?

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

The desk is 186cm wide (73.23 inches) The distance to the computer case could be a bit small if you use two 27" monitor and mount them centered to the desk

Permalink
AsianPartPicker 1 point 9 months ago

I am probably going to mount them with a clamp. Where one mounitor drifts off the side of the desk. While ny gaming monitor is centered a bit

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

Normally a 27" monitor is about 60cm wide. My monitor is about 82cm wide so if you center your gaming monitor there should be no problem :)

Permalink
Continue this thread
WyrmWolf130 1 Build 1 point 9 months ago

I love that case. +1

Permalink
MannyPCs 1 point 9 months ago

Beautiful build. +1

How do you like that monitor?

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

I like the monitor. A lot of space for work. :) I'm working with Blender sometimes and it is great to use it on a 21:9 with 3440x1440

Permalink
westwandaguys 1 point 9 months ago

Are those cable extensions or fully modular cables?

Nice work

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

The 24 pin cable is a extension I made, the CPU and VGA cables are both fully modular ones

Permalink
KralixUK 4 Builds 1 point 9 months ago

Very nice looking simple build. the case looks really nice next to the curved monitor +1

Permalink
DeadCarrot 2 Builds 1 point 9 months ago

Very clean wire management. Overall a very nice build!

+1

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

You didn't see how it looks under my desk xD But I'm working on it :)

Permalink
Zephyr_Exile 1 point 9 months ago

This is really besides the point but what kind of desk is that..? It’s a really smooth looking desk and that’s something I’m kind of looking for! Thank you!

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

The desk is the IKEA Karlby walnut countertop and the ALEX drawer and cubicle. The countertop is the 186cm wide version.

Some people drill holes in it to hide the mouse and keyboard cable. I prefer sleeving both cables together so it looks like one :)

Permalink
Zephyr_Exile 1 point 9 months ago

Thank you!!!

Permalink
Merisal submitter 3 Builds 1 point 9 months ago

You are welcome

Permalink
antonjetpack 1 point 9 months ago

THIS IS MY FAVORITE BUILD ON PCPP

Permalink
_Numbb 1 point 7 months ago

hehe noice

Permalink
ComputerGuy22 1 point 6 months ago

Does it come with the radiator???

Permalink
Merisal submitter 3 Builds 1 point 6 months ago

The radiator is part of the NZXT X52. The NZXT X52 is a AiO water cooling system. It is ready-to-use and contains the CPU cooler with a top mounted pump/reservoir and the radiator with fans.

Permalink
[comment deleted by staff]
Gooberdad 10 Builds 2 points 9 months ago

Why?

Permalink
manirelli staff 8 Builds 1 point 9 months ago

Please keep feedback polite and constructive.

Permalink
Gooberdad 10 Builds 1 point 9 months ago

Thanks.

Permalink
[comment deleted]
[comment deleted by staff]
Merisal submitter 3 Builds 1 point 9 months ago

Thanks mate. I agree with you and I was positive surprised to see my build as a featured one.

Which doesn't mean the other (expensive) builds aren't worth it. They looks great and if I ever have the chance to build a pc without having a look to my pocket it would be a pleasure to use the chance :D

Permalink
[comment deleted by staff]
[comment deleted by staff]