I didn't want something black... That is to generic nowadays. I really the like the Black/White theme and so I went forth to make one. One word of caution, getting 'white' anything is more expensive than black.

Initially I started out with the Asus ROG STRIX X470-I GAMING Mini ITX AM4 Motherboard and the ARCTIC Freezer 34 eSports CPU Cooler. I returned them because the CPU Cooler was to large for this case, it blocked the rear RGB fan and it was a bit noisy for my taste. The motherboard was returned because I was not able to find someone to upgrade the BIOS in order to use the AMD CPU. The time and price to upgrade the CPU would have put it over the price of the Gigabyte.

I chose the RX 590 because all I play is Diablo III and it was more then enough to play on max settings.

With 4 case fans I wanted to be able to control all the fans and RGB's with a single controller and software so I bought the Corsair Commander Pro.

I'm still in the process of buying a couple of white cables but after the initial purchase of everything, I have to wait for the dust to clear.

The Jedi logo on the front was custom made and purchased by

The Jet Trooper is from the 'Rise of Skywalker' movie and is made by Hasbro.

Part Reviews

CPU Cooler

So quiet and so easy to install. The cables coming from the CPU cooler are a bit of a pain to route


The white case just rocks this build. Knowing what I know now, I would have bought the case without the controller.

Log in to rate comments or to post a comment.


  • 2 months ago
  • 1 point

Excellent build! The 3600 is a beast of a CPU and the RX 590 can handle everything under the sun at 1440p (Sapphire makes excellent cards too). The white cables will definitely pull this thing together well.

  • 1 month ago
  • 1 point

So recently building a pc for a friend using the same cooler and Mobo. For some reason the board won’t post with the Corsair Aio installed but will post with the stock AMD wraith. Out of curiosity and at a thinking the pump may need rma’d did you use the single USB 2.0/1.1 header for the aio pump? For the fan I used the cpu fan header at the top left portion of the board. Thanks!

  • 2 days ago
  • 1 point

Well firstly, you need power to the pump. Which should be given by the mobo by fan_header or aio_pump. or through your power supply. The usb header to micro usb is for RGB functions only.