Overkill case. Gaming only. Wanted a high end rig that will last me a while... used mATX format. This is my 1st build. I've seen quite a few builds, but none that are pushing this case to its limits... which is what I think I tried to do. Seems people think there is an airflow problem with the case... not anymore. Added two slim fans to the outside top of the case (rather than on the inside like most people do). Slim fans (12mm) fit inside the top lid just fine. Also placed one fan on the inside top of the front of the case. Normally there are just small holes on the side to let in fresh air, I increased the air intake by using a Dremel tool and making the existing holes larger... problem solved. There is a wire mesh here that is in front of the holes so it still looks clean and basically as it did unaltered but with better airflow now. So, airflow is now top to bottom and front to back. I also painted the black metal mesh white to have an all white case.
Edit: Just added a Phobya 140mm grill to the front of the case to greatly increase the air intake to the fan mounted to cool the graphics cards from the front.