PCPartPicker

  • Log In
  • Register

Corsair Crystal 570X w/ H150i PRO RGB Build

Recent Posts

October 2018

September 2018

March 2018

February 2018

December 2017

November 2017

October 2017

September 2017

August 2017

July 2017

June 2017

May 2017

April 2017

March 2017

February 2017

January 2017

December 2016

November 2016

October 2016

September 2016

August 2016

July 2016

June 2016

May 2016

April 2016

March 2016

February 2016

January 2016

November 2015

October 2015

September 2015

August 2015

July 2015

June 2015

May 2015

March 2015

February 2015

November 2014

October 2014

September 2014

August 2014

July 2014

June 2014

May 2014

April 2014

March 2014

February 2014

January 2014

December 2013

November 2013

October 2013

August 2013

July 2013

June 2013

May 2013

April 2013

March 2013

January 2013

December 2012

November 2012

October 2012

September 2012

August 2012

July 2012

April 2012

March 2012

Post

BoyScout Jan. 31, 2018

What happens if you want all of the RGB? Or as Barry calls it -- just another day at the office.

Watch as he brings together Corsair's assorted RGB components -- from the new H150i PRO CPU Cooler, to the LL (light loop) fans, and even the Vengeance RGB memory -- and displays them in the the 4-sided tempered glass showcase that is the Crystal 570X RGB case.

Corsair Crystal 570X Build

All that lovely RGB does bring a LOT of cables into the build, so be sure to check out how Barry ultimately cleaned everything up in our cable management time lapse video.

PCPartPicker part list / Price breakdown by merchant

Type Item Price
CPU Intel - Core i7-8700K 3.7GHz 6-Core Processor $359.99
CPU Cooler Corsair - H150i PRO 47.3 CFM Liquid CPU Cooler $169.99
Motherboard ASRock - Z370 Taichi ATX LGA1151 Motherboard $219.99
Memory Corsair - Vengeance RGB 16GB (2 x 8GB) DDR4-3000 Memory $229.99
Storage Corsair - Force MP500 480GB M.2-2280 Solid State Drive $229.99
Storage Seagate - Barracuda 2TB 3.5" 7200RPM Internal Hard Drive $74.99
Video Card EVGA - GeForce GTX 1080 8GB SC2 Gaming iCX Video Card $584.99
Case Corsair - Crystal 570X RGB White ATX Mid Tower Case $179.99
Power Supply Corsair - RMx White 850W 80+ Gold Certified Fully-Modular ATX Power Supply $169.99
Case Fan Corsair - LL120RGB LED (Three Fans With Lighting Node PRO) 43.2 CFM 120mm Fans $119.99
Case Fan Corsair - LL120RGB LED (Three Fans With Lighting Node PRO) 43.2 CFM 120mm Fans $119.99
Total $2459.89 (USD)

A big thanks to ASRock for providing their Taichi Z370 motherboard, as well as to Corsair for providing the CPU cooler, memory, PSU and case fans used in this build.

Comments Sorted by:

PowerPunch360 7 points 10 months ago

Beautiful eye candy! Just one question though. Do those fans have enough static pressure for radiators?

BoyScout staff submitter 21 Builds 10 points 10 months ago

They should work reasonably well. Corsair classifies the LL fans as static pressure, though they aren't as effective as the ML PRO series fans included with the H150i PRO.

Fan Airflow Static Pressure Noise
Corsair SP120 62.74 CFM 3.1 mmH2O 35 dBA
Corsair SP120 (RGB) 52 CFM 1.45 mmH2O 26 dBA
Corsair HD120 (RGB) 54.4 CFM 2.25 mmH2O 18-30 dBA
Corsair LL120 (RGB/Light Loop) 43,25 CFM 1.61 mmH2O 24.8 dBA
Corsair ML120 (RGB/Mag Lev) 47.3 CFM 1.78 mmH2O 25 dBA
Corsair ML120 PRO (Mag Lev) 12 - 75 CFM 0.2 - 4.2 mmH2O 16 - 37 dBA

So, yes.. An argument can be made that we made things worse for the eye candy, but it should certainly still be sufficient for the task.

Rensshai 1 point 6 months ago

If I have the commander pro how many ll120 I can plug in for the rgb?

wismetalman 1 point 2 months ago

Up to 9 if you buy the lighting pro kit and the 3 pack of ll120s with the included controller.

DarkAcheron 1 Build 2 points 9 months ago

Honestly, considering there's only the CPU on the loop, the fans will be more than sufficient even when overclocking.

philmoeslim 4 Builds 1 point 2 months ago

Ill be honest, I replaced my corsair sp fans with the LLrgb ones and it dropped my temps on processor by 15 deg c. I was super surprised by their performance.

Duramaxx 0 points 10 months ago

https://www.youtube.com/watch?v=mb7n_b39F78&t=427s Great video on these fans and the performance on a rad.

Lobsterareawesome 7 Builds 4 points 10 months ago

The PSU shroud looks bad.. i mean cmon..

BoyScout staff submitter 21 Builds 5 points 10 months ago

How so?

Lobsterareawesome 7 Builds 4 points 10 months ago

that on the front it is open.. you can see all the cables. I think it kinda takes away the point of a PSU shroud

BoyScout staff submitter 21 Builds 1 point 10 months ago

Ah, ok.. You have to play the angle game a bit. From straight on, you don't really see that, but from a front angle, sure. You have to tuck them somewhere, after all.. An extension or end cap (with holes for cables) to cover the unused area might be nice, but we'd have had to remove some portion of a longer shroud to fit the 360mm radiator anyway.

Lobsterareawesome 7 Builds 1 point 10 months ago

yeah.. I would have liked to see an endplate or something.. Or like other cases where you can remove the top part of the shroud to mount a 360mm rad

BoyScout staff submitter 21 Builds 3 points 10 months ago

Okay, so apparently there is one.. We may have to snag one of these. Looks like it could majorly improve the look of the shroud.

IanCurrier 1 point 9 months ago

ive seenpeople building custom shrouds for sale! they look great and add to the case / cable managment

KiteDevious 6 Builds -2 points 7 months ago

it is truly ugly, the additional cover cost $4.99 check my completed build

Thomas_Mason 2 points 10 months ago

they are available as a separate purchase end it comes standard on the Mirror edition.

William.Gonzales 1 point 10 months ago

That's always been my biggest gripe about these cases. The shroud on the 460 is perfect, and then they just got rid of it as you move up to the 570, and I'm like. Why couldn't they just keep this one little thing uniform for both cases. Seriously.

Crillan 1 Build 1 point 8 months ago

They sell it separately. I have one on my build:

https://pcpartpicker.com/b/XMXPxr

CureMelons 2 points 10 months ago

Why are the top exhuast fans set as intake???

BoyScout staff submitter 21 Builds 1 point 10 months ago

So yeah.. we debated this a bit. We did it mostly for the visual effect, to create the "up and over" light pattern through the top glass; however it does also serve to push air across the VRMs. Clearly more intake air than we need, but the fairly open design of the case deals with the extra air intake well.

MikeWantsPCs 2 points 8 months ago

The moment of satisfaction when he removes the plastic wrap

dominicc_02 1 Build 1 point 10 months ago

wait a minute so i can pick my jaw up off the floor, that case is amazing

oleSLICK 1 point 10 months ago

Funny i cant find that video card anywhere for that price.

Shoot_to_kill21024 2 points 10 months ago

They just put it around MSRP because oof

BoyScout staff submitter 21 Builds 1 point 10 months ago

It was purchased for a previous build and reused in this one. We felt that it wouldn't particularly make a lot of sense to list it at some crazy inflated (and unavailable) price, so we listed it at it's MSRP. And, to be fair, according to our price charts, it has been available sporadically off an on over the past month within about $10-$30 of that price.

mintoreopanda 1 point 8 months ago

That's because of economical inflation for video cards because of cryptocurrency mining for bitcoins and dogecoins (im not kidding that a thing"

beer752 1 point 10 months ago

That's an interesting concept an all glass case it's too bad tinted.

gunit1111 3 Builds 1 point 10 months ago

Where did you get a 1080 for $500?

BoyScout staff submitter 21 Builds 2 points 10 months ago

Not sure where you see $500, but the EVGA GTX 1080 SC2 runs about $580-$600 normally. We already had it on hand and selected it a while back to use in this build.

FYI, our price history graph shows it's been available within that price range (when it's actually available) over the past month or so. It does also show a few price spikes to $700 and $800, but those appear to be via third party sellers.

epijlh 1 point 10 months ago

Did you have to modify the case for the PSU pass-through? I am probably buying this case in a few weeks and none of the red/black/white ones I have seen have that hole - Only the new mirror black seem to have it.

BoyScout staff submitter 21 Builds 1 point 10 months ago

We didn't modify the case at all -- which hole are you referring to?

epijlh 1 point 10 months ago

On the top of the PSU cover, the hole with the grommet. I will have to ask Corsair directly. After doing some more research, it looks like some cases have this hole and some to not.

Crillan 1 Build 1 point 8 months ago

I got the black version of this case, and it also had the grommet hole on the top of the PSU. I passed my GPU cables through it:

https://pcpartpicker.com/b/XMXPxr

epijlh 1 point 8 months ago

I got the mirror black version specifically for the grommet and included shroud. The RGB and USB C on the I/O was also a huge plus.

Crillan 1 Build 1 point 8 months ago

It seems they've either updated all their cases to include the grommet, or they have some weird inconsistency going on. My black non-mirrored case had the grommet, but I did have to order the shroud cover from Corsair. It was worth it!

fakeirish 1 point 10 months ago

only complaint I have is I wish it had more white parts

DivineThreshold 1 Build 1 point 10 months ago

I did a very similar build! Very happy with the performance and overall look. The LL120s aren't great performers on a rad, but with the 150i and delidded 8700k, I'm able to run them at 900rpm (silent) and still achieve adequate idle/load temps, ~30°C/65°C.

Here's mine: https://ca.pcpartpicker.com/b/D6pG3C

Nice work!

ironman3445 1 point 10 months ago

Can someone please tell me why they haven't put the rest of the PSU shroud on yet?

RunninUte 1 Build 1 point 10 months ago

To fit the CPU coolers radiator... that's a big boy.

Crillan 1 Build 1 point 8 months ago

It doesn't come with a shroud cover. It's a separate piece that I had to order separately for my build:

https://pcpartpicker.com/b/XMXPxr

Waytort59 1 point 2 months ago

I think its ridiculous that Corsair can't throw in a $4 optional part. Pathetic Corsair. Pathetic.

ajenson1991 1 point 1 month ago

actually just finished my new build using this case and the shroud cover is included now.

Stick_Bug 1 point 10 months ago

I never found the case in grey before...

RunninUte 1 Build 1 point 9 months ago

It's not grey... the glass is tinted so it makes it look grey.

zephrim 1 Build 1 point 10 months ago

I expected better cable management on the backside. There is enough room in the back channel to fit all of those cables and its just part of the fun!

Crillan 1 Build 1 point 8 months ago

I have the same case, but in black, and I routed my 24-pin cable basically the same way he did. I found that if I tried to hide it more and run it to the bottom of the channel, it wouldn't reach the PSU. I kind of like that it's exposed, since I used a light blue cable, and it adds to the overall blue look/theme that I wanted.

https://pcpartpicker.com/b/XMXPxr

SuperCMTR 1 Build 1 point 9 months ago

how'd you get that 1080 for $585

dnguyen233 1 point 9 months ago

Absolutely love the build! Planning to make this my first pc build.

I'm looking at the parts list and I noticed there are a few compatibility notes. The motherboard M.2 slot #1 shares bandwidth with SATA 6.0 Gb/s ports. When the M.2 slot is populated, two SATA 6.0 Gb/s ports are disabled. The motherboard M.2 slot #2 shares bandwidth with SATA 6.0 Gb/s ports. When the M.2 slot is populated, two SATA 6.0 Gb/s ports are disabled. The motherboard M.2 slot #3 shares bandwidth with a SATA 6.0 Gb/s port. When the M.2 slot is populated, one SATA 6.0 Gb/s port is disabled.

Will these notes effect the functions of the computer in anyway?

BoyScout staff submitter 21 Builds 1 point 9 months ago

It should normally be fine -- what it's saying is that for each M.2 slot you use (ie, for an M.2 SSD) that it disables one of the SATA ports used for traditional hard drives/SSDs/optical drives.

It's something you want to know about so that you check the motherboard manual when connecting any SATA drives to make sure you use the correct ports that aren't disabled. In our build above, we just checked the manual before connecting the 3.5" HDD to the motherboard to make sure we didn't use the port that is disabled by the M.2 slot we happened to use. There's 8 SATA ports on this motherboard, so it's not really an issue.

sdgipson 1 point 9 months ago

Great build! I am actually building this exact same setup.

Couple of questions if you don't mind:

  1. Does the top of the case fit 140mm LL series fans as well?
  2. I am adding in some Corsair LED Lighting strips ( 4 of them, 2 in the case, 2 behind the monitors), should I get a commander pro to control it all or does the included Lightning Node Pro work sufficient enough to control it all and change the colors, speeds etc. with Link?
Crillan 1 Build 1 point 8 months ago

The top does indeed take the 140mm LL fans. I'm using them on my build. I also have 4 of those lighting strips and I have everything plugged into a Commander Pro. I got a Lighting Node Pro in the 3 pack, but I don't use it. I needed the USB hub on the Commander Pro and wanted to control fan speeds. I believe you'll be ok with just the Lighting Node Pro for RGB, but I don't think that controls fan speeds. Check mine out below:

https://pcpartpicker.com/b/XMXPxr

DarkAcheron 1 Build 1 point 9 months ago

Looks great, love the Tiachi board, though I'm a fan of the ASUS ROG Strix Z370-E Gaming board personally. Definitely add the shroud, though I would cut a small pass through in it, get some rubber grommets to make it look nice, and pass the PCI-E cable through it for a nice clean look. Maybe do some sleeving on the AIO tubing to make them white if there's a compatible kit online. I just wish this case had a little bit more room for cable management, mine's cramped, but then again I do have a full custom loop in it.

DarkAcheron 1 Build 1 point 9 months ago

Maybe do some Aluminum, clear, or white cable combs too. Ugh, so much more greatness to be had of this build, and so many directions it can go.

Pcjulian12343 1 point 9 months ago

Would you ever consider using liquid metal instead of regular thermal paste?

MartinSantos22 1 point 8 months ago

Coming soon.. This will be my new baby... :)

Crillan 1 Build 1 point 8 months ago

I just posted my new build last week using the same case, fans, memory and AIO. I got the black case instead of the lighter one and my RAM is black and 2x16 GB 3200. I didn't use the Lighting Node Pro since I got a Commander Pro to plug everything into.

https://pcpartpicker.com/b/XMXPxr

BoyScout staff submitter 21 Builds 1 point 8 months ago

Very nice -- looks great!

jaime.guti 1 point 8 months ago

What is the difference between the three fan kit of the fans and buying them individually? I'm looking for a build with those fans but can't tell the difference. Thanks!

BoyScout staff submitter 21 Builds 1 point 8 months ago

The 3 fan kit comes with the Lighting Node Pro controller. Without it, you won't be able to change the lighting on the fans. (The controller can control up to 6 fans though, so they sell the individual ones in case you want to add more for your particular setup. Corsair sent us two 3 packs, so we used them -- but technically we could have gotten a single 3-pack and 3 additional individual fans to get the same result)

jaime.guti 1 point 8 months ago

Oh thanks, didn't know that. Can you give me your thoughts on the build im thinking of? https://pcpartpicker.com/list/mdD9WD

Did it based on your video, love the RGB things!

BoyScout staff submitter 21 Builds 1 point 8 months ago

Only thing that might be tight is the RAM clearance with the radiator if mounted up top since the GSkill TridentZ memory is a bit tall.. but it looks like it's been done with success, so should be fine. You could also put the radiator at the front list this one, which is kind of interesting.

It's technically fine, but you might also want to consider bumping the PSU up a bit (maybe 750W?) for a little headroom if you intend to overclock things at all.

Also, (if you have the budget to do so) consider bumping the SSD to 500GB.. 250, even with the intent to mainly be an OS drive, just fills up so quickly..

Good luck with your build!

Aukwafied 1 point 8 months ago

Question about RAM, could I replace the 2x8 RAM with 4x8 RAM (same Corsair RGB white mode) would clearance be fine here or no. I really want to use this build with changing just some of the parts for performance reasons.

BoyScout staff submitter 21 Builds 2 points 8 months ago

Yes, there's enough clearance. I just did a quick check with the two DIMMs we have -- the inside DIMM is close to the cooler, of course, but doesn't touch anything, so you should be fine.

Good luck with your build!

Aukwafied 1 point 8 months ago

Can this build play Minecraft 60fps with Modpack and Shader installed?

Mahmooody 1 point 8 months ago

If the CPU cooler already had the ll fans come with it why did you buy 2 sets of three? are they different?

BoyScout staff submitter 21 Builds 1 point 8 months ago

Correct -- they are different. The fans included are the original Corsair "SP" fans. You can't mix the different fan types (SP, HD, LL, ML/RGB) on a single controller hub. That said, we technically could have kept the SP fans and added LL's using the Lighting Node Pro with two hubs (since our 3-pack included a second hub). The LL fans would connect on a hub connected to one channel on the Lighting Node Pro while the SP fans would connect to the second channel / hub.

chrmodynamic 1 Build 1 point 8 months ago

Holy crap, 6 LLs? It's a major pain in the *** to cable manage with my 3 LLs, I can't imagine what it's like with 6... but it's a beautiful build man. I'm sure the frustration is well worth it!

StanMcNasty 1 point 8 months ago

I like this, a bit expensive, but I think it can be worth it in the future.

azerkoid 1 point 8 months ago

Do you have a link to buy the same psu white cables? I would want those but I can't find em

BoyScout staff submitter 21 Builds 1 point 8 months ago

Sure, the cables come included with this particular PSU since it's a special "white" edition of the RM850x: Corsair RMx White 850W

azerkoid 1 point 8 months ago

Oh thanks! I'll buy that one! :) Thank you for the reply!

Alvin1404 1 point 7 months ago

How many fans are there in this build? I can only see 4 plus the 2 on the H150i?

BoyScout staff submitter 21 Builds 1 point 7 months ago

There are 6 120mm fans in this build -- the H150i is actually a 360mm radiator, so it has 3 fans; plus two at the top and one at the rear.

ProPC.tech 1 point 7 months ago

We love this build! Hard to find anything not to like... if we had to find one, it would be the case chassis color. White rarely looks good when combined with Tinted Glass in our opinion. If at least the fan mount locations where BLACK or the entire case frame was black it would look so much cleaner. But we LOVE the hardware selection and configuration. Well played!

pat34us 1 Build 1 point 7 months ago

I apologize in advance for stealing this build. I already own the white 570x and ll120 fans.

BoyScout staff submitter 21 Builds 1 point 7 months ago

:D Glad you found some inspiration in it.. Good luck with your build!

gregjbrost 1 point 7 months ago

I'm looking to buy the parts for this pc but don't want to blow all that money. I'm going to downgrade the graphics card but what else should i downgrade

BoyScout staff submitter 21 Builds 1 point 7 months ago

For advice on an alternate version of the build, I'd recommend posting your part list in the Create a Part List for Me forum and ask for help getting to the budget you had in mind, noting which parts you are hoping to keep in place and any other thoughts on what you are hoping to see in the build. Lots of folks willing to help there, if you give them some good parameters around what you're looking to build. Good luck planning your build!

tGoM 1 point 7 months ago

What is the best software to get all the parts to sync with rgb?

YJKim 1 Build 1 point 6 months ago

Tempered glasses are good! but honestly, I don't want to see my web cables on the right side of my PC.

F22 1 Build 1 point 6 months ago

How's this case handles dust? Is it visible on the glass?

BoyScout staff submitter 21 Builds 1 point 6 months ago

It builds up over time around the intakes and of course just settling on the top like most cases. Certainly visible if you let it build up.

DANIEL777 1 point 6 months ago

Looks extremely good!

One comment to leave: Too much air Intake for this build: 5 intake fans, and only one to exhaust the air out. This leaves hot air trapped inside the case; overheats could possibly happen.

BoyScout staff submitter 21 Builds 1 point 6 months ago

Thanks! Glad you liked it. And thanks for the feedback.

We debated this a bit ourselves, but temperatures were normal in our benchmarking. The sides of the case (along the edges of each glass panel) are actually open, so the air is not as trapped as it might seem at a glance. And ultimately, if you want the rings to light up through the glass, it sort of forces your hand on air flow choices. Thankfully it worked out!

balilcy 1 point 5 months ago

Hey, I'm wondering, does this motherboard have any more fan connectors available or are they filled by the fans you have installed? I wanted to install a second set of fans on the other side of the radiator to increase airflow.

BoyScout staff submitter 21 Builds 1 point 5 months ago

We are using all the headers with the existing fans. You'd probably need to pick up a fan controller or at least some splitters for the CPU block fan headers to go push/pull.

(The motherboard has 3 chassis fan headers, in addition to the CPU fan header and a CPU Optional/Water pump header.)

ScarletOG 1 point 5 months ago

this thing is a beauty. I'm gonna ask my dad if I can build this.

Uknwn_Lgnd 1 point 5 months ago

the, most, beautiful, PC, I've, laid, my, eyes, on.

devanpy 1 point 4 months ago

Amazing! This is just how I want my PC to look like

techvixen 1 point 4 months ago

I'm hoping this build goes off without a hitch :)

JeroenFleer 1 point 4 months ago

Awesome! such a great video once again! In a few weeks I will be building a pc for the first time with almost the same computer parts.

Death50009 1 point 4 months ago

Do you need a internal usd to power the fans

Death50009 1 point 4 months ago

I mean usb

holajamil 1 point 4 months ago

Amazing! I want this

Harryet-Tubman 1 Build 1 point 3 months ago

This is one of the sexiest things I've seen.

rant2087 1 point 2 months ago

What is the max gpu length with this case when it is a push/pull config?

elijahcortez 1 point 2 months ago

i,ve recently built my pc with the beautiful corsair LL120 fans and downloaded Corsair ICUE does anyone know how I can get the default RGB effect it had in the first place?

daniel2tio 1 point 2 months ago

Could anyone tell me a motherboard that I can use instead of this one please, preferably one t=with the same features as I am willing to build my PC with the new RTX 2080 Ti Graphics card but this motherboard shown in the video is out of stock from the website i'm buying my parts from :(

danmartin 1 Build 1 point 2 months ago

I'm really not a fan of white cases with a lot of glass like this one. Great build though!

Rengi 1 point 2 months ago

Great build, 1080 seem a bit low profile here, with extra cost for 1080Ti should fit this high profile build..

RGB_Glory 1 point 1 month ago

Great build! I was looking for a cool RGB build to do with my son and saw yours so I copied it. Thank you so much for the video, it saved us hours! He loves it (and so do I)! I haven't built a pc in years so this was a fantastic help.

Since you removed the pre-installed lighting controller, are the buttons on the case inactive - mine don't work and I'm assuming that's the reason. Also, what's the easiest way to get back to the fan color scheme of rolling the colors from the front to the top and the back after you've changed it with iCue? Do I have to create my own profile with iCue to replicate that?

And were you able to turn off the red BIOS led that is always on?

Thanks again - great build and fantastic video!

HeronLabs 1 point 1 month ago

This RGB is awesome, could you do a RGB Threadripper 2990wx workstation build

woahwoahwilly 1 Build 0 points 2 months ago

Everywhere you go it's i7, i7, i7.

Variety, anyone?

That system's a beauty, though.

JDRWilkinson -4 points 7 months ago

You're using THAT MANY Corsair products all in one build? Hope it makes it through the week.

woahwoahwilly 1 Build 1 point 2 months ago

You say that like it's a bad thing. Yes, Corsair liquid coolers can be kind of crap, but not all of their stuff is bad.

[comment deleted]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted]
[comment deleted by staff]
[comment deleted by staff]