|( 5 new from $125.00. Last updated 6 hours ago. )|
|$129.00||Out of stock||$129.00+||Buy|
|$135.00||Out of stock||$135.00+||Buy|
|$139.00||Out of stock||$139.00+||Buy|
|* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com.au at the time of purchase will apply to the purchase of this product.|
Socket / CPU
Black / Red
PCI-E x16 Slots
PCI-E x8 Slots
PCI-E x4 Slots
PCI-E x1 Slots
SATA 6 Gb/s
Depends on CPU
Onboard USB3.0 Headers
- 22 points
- 6 months ago
from completed build A Year's Hope
Knocking off one star because it isn't the most tolerant to very sudden power connects and disconnects, but that may just be me. Accidentally plugged in my PC while the PSU switch was on and, since i kept unplugging and plugging it, trying to get it in, it silently fried my motherboard. Got it replaced and has been working just fine. The pci-e x16 slot is a bit difficult as the clasp is nerve-rackingly tight. Other than that, it does what it needs to do.
- 18 points
- 2 months ago
from completed build My first build.
The ability to do a bios flash with no cpu ultimately is why I went with this board.
- 15 points
- 11 months ago
from completed build Vanitas
Solid little mobo, only downside is one of the RGB connectors was bent, but I wasn't using it anyway and theres a very slim chance of another arriving that way :)
- 15 points
- 7 months ago
from completed build Ryzen 5 2400G build without GPU.
Great MOBO for beginners.. Have all the basic stuff.
- 12 points
- 21 days ago
from completed build CS:GO FPS MACHINE
This is all I ever needed. I'm not a crazy overclocker nor do I care for VRM cooling with a Ryzen 5 3600. I flashed to BIOS version 19 and it booted right away. I used all of the RAM slots (2) and all of the system fan headers (2). With thick GPUs like the 5700 XT, the PCI_E2 and PCI_E3 (both x1) are blocked so you won't be able to use a network card, not even with a ribbon cable, it's just too tight.
The BIOS for 3rd gen ryzen does not have crazy graphics, but is text based just like in the old days. For me this was all I needed. You will want to set fan curve unless you're hearing impaired.
- 10 points
- 3 months ago
from completed build Tundratown
A solid choice for a microATX AM4 board. It's basically one of the few in this size with BIOS flashback, and according to that VRM tier list that floats around the web, this one isn't bad, but not amazing either. All the headers are clearly labelled. The price is pretty good, too.
All in all, it's not the most exciting motherboard, but it does the important things properly.
- 9 points
- 6 months ago
from completed build $493 Gaming/Steaming/Editing Ryzen 5 1600 + 16GB + XFX 570 4gb +480GB SSD
Good budget board. Overclocked my R5 1600 to 4 ghz and my 3000 mhz RAM to 3200 (didnt try higher) same timings.
- 8 points
- 1 month ago
from completed build My First PC. Budget Editing/Gaming AMD Build
A good option for the price. Has M.2 boost so it transfers information faster. Only "downside" would be it only has two RAM slots and doesn't support above 32GB of RAM, but I went with 16GB, so it doesn't matter to me.
- 6 points
- 1 month ago
from completed build First Build, R5 2600, Rx580 8GB, 16gb ddr4 3000mhz
- MSI B450M Gaming plus : Due to not overclocking yet, little to say once again, motherboard looks good and i can hardly see the red accents through my slightly tinted glass, has 1 m.2 port which is nice, 3 fan headers, and due to the 2 available slots for ram being dual channel there is no bad side to only having 2 slots, by the time 16gb is too little for gaming ill have a job ill probably just build a new computer, that is not to say this motherboard has no ram upgradibilty, you should buy 2 new sticks of 16gb if upgrading when you even have 4 slots so you take advantage of the dual channel. Back IO has 5 total usb ports and 1 usb-c, more than enough for me. The backplate is mostly matte black with small red accents as well as labelling for all ports. The pcie x16 slot has the msi armour metal thing for your gpu, helps with GPU sagging, i have a 24cm gpu and no sagging is seen so i guess it does its job. Both the manual and the case itself have a print out with labeled pins for the front IO, i have fat fingers but still managed to do it in 2-3 mins.
- View Compatible CPU Coolers
- View Compatible CPUs
- View Compatible Cases
- View Compatible Memory
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters