|( 1 new from $72.09. Last updated 3 hours ago. )|
|* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com.au at the time of purchase will apply to the purchase of this product.|
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
MicroATX Mid Tower
Black / Blue
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
340 mm / 13.386"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 13 points
- 36 months ago
from completed build Heracleion - Super-Budget Gaming PC
It's sleek, it's got a nice blue LED fan pre-installed, it has the front panel placed on top rather than in-front, and it's got a see-through side panel. The only things I'm not a fan of is that one of the legs keeps coming off, and both of the side panels are EXTREMELY difficult to "break in" the first time. They're much easier to remove after the first few times, however. The PSU holes are a little difficult to align, and the non-replaceable expansion slot thing irks me a little. It's also slightly cramped overall, but hey - make do with what you got! Also, it's a bit of a fingerprint magnet, so watch out.
- 10 points
- 18 months ago
from completed build Apevia X-QTIS-BK AMD A12-9800 ASUS PRIME A320M-K
Very nice looking micro ATX case, but comes at a price. The glossy black plastic scratch just looking at it. Wiped it with a lint free cloth and it scratched. It's made cheaply and cable mgmt is not user friendly. I ended up putting all the cables in a bundle on top of the DVD drive and made a 24 PIN extension cable to exact length needed, as well as the SATA power for the HDD sitting at the bottom. The case came with plastic arms to attach to 3.5" HDD to allow for easy sliding in/out. the pin that goes into the screw hole broke on 2 of the arms. I gave up and put the drive at the bottom. Important to point out that if you do install the 3.5" HDD with the plastic arms, you are forced to have the connectors facing you, instead of facing the back for a cleaner cable setup. Two of the plastic feet fell and don't feel very secure after putting them back on. On a positive note, the front 120mm fan seems to provide a good airflow.
- 8 points
- 41 months ago
from completed build Bang for your Buck Budget Build
I wanted something stylish but also cheap. This is a black mid tower case with blue lights coming out the front fan. Very nice looking and sleek with its see-through side panel. Very easy to work in, only complaint was with the orientation of my PSU, I would have liked it to be able to flip it upside down for better fan flow, but would not line up with the screws right. Overall, a very nice case.
- 8 points
- 33 months ago
from completed build My Frankenstein's Monster of a First Build
The case... I wanted to stick with a smaller form factor for my computer and began my search for a mATX case. This case was amazingly cheap and looks great to me. It even comes with a window in the side panel. For a mATX case, Apevia has done a great job, giving you lots of room if you have an enormous graphics card. It can also take several hard drives and a 5.25 inch drive in a couple different configurations, to meet your needs. That being said, there are some things that I didn't like so much about this case. Apevia give ample room in the case for components, but contrary to their description, cable management is a nightmare. A NIGHTMARE! They were nice enough to have a few cutouts to run the cabling through, but between the wall the motherboard is mounted on and the side panel of the case, there is maybe half and inch of clearance to squeeze all those cables into. This is where a fully-modular PSU would've been great. Although I tried to use only what I needed, there were still a few extraneous, leftover cables hanging out. Another thing that gave me difficulty was the wiring from the front panel. The power button and USB inputs are placed on the top of the case, which makes sense in terms of ease of use, but for wiring, that proved troublesome. The mobo header for the HD Audio was on the opposite corner of the case and the only way the connector could make it was directly across the inside of the case. This issue may have just from the combination of mobo and case, but a slightly longer wire wouldn't have hurt. Another interesting thing I noticed is that the top fan mount is located smack dab in the middle of the top of the case. There's a mesh vent on the top, which is identical to the one on the front to show off the glow of the fan, but the top vent doesn't line up with the top fan mount... And this may be my fault for picking a small case, but my PSU was slightly too long, so it prevented me from installing my second fan anyhow.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters