|( 3 new from $28.46. Last updated 24 minutes ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com.au at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
- 16 points
- 19 months ago
from completed build Lian-Li Q33 quiet PC
Works well and good looking. Installation is easy as well.
- 8 points
- 9 months ago
from completed build Randy Savage: Cream of the Crop
- I didn't think this would make a huge impact on thermals, but to my delight the heat sink significantly lowered the temps of my 970 EVO. I was getting nervous as I was transferring files the 970 EVO was throttling it's bandwidth due to high temps, but now I can throw anything at it with this heat sink! I will say the installation was not as smooth as I thought it would be, but it didn't take much longer than 15 minutes to clean any thermal contacts and finish the assembly/installation.
-No heat sink Idle: 60 C
-Heat sink Idle: 30 C
-No heat sink under load: 81 C
-Heat sink under load: 60 C
- 7 points
- 18 months ago
from completed build Water-Cooled Define Nano S (HTPC Gaming)
Preliminarily, doesn't take a lot of temperature off normal usage, but took up to 15 ~ 20C off full load while stress testing the drive. This led to better results in CrystalDiskMark too. Not to mention it has a certain aesthetic that I happen to really like. Not a bad way to spend 20 bucks!
The instructions say to use the 1mm thick thermal pad above the drive and the thinner 0.5mm pad below. According to many Amazon reviews, however, since the memory modules are taller on the top/back of the drive, it’s better to use 1mm on the top half near the M2 port, then 0.5mm on the back half towards where you score the drive in. Apparently this will reduce stress on the board when mounted. I did it this way personally and it works fine (see my pictures for an example) — take that for what you will. :)
- 4 points
- 8 months ago
from completed build First Build (that went over-budget)
Works like a charm. With my m.2 being mounted at the backside of the motherboard tray where airflow is poor, this certainly saved the day. Temperatures dropped by about 20 °C and installation was a breeze, provided I had to watch how-to videos on YouTube as the packaged instructions were extremely lacking.