|$90.01||Out of stock||$90.01+||Buy|
|( 2 new from $90.01. Last updated 6 minutes ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com.au at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
MicroATX Mini Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
350 mm / 13.78"
Internal 2.5" Bays
Internal 3.5" Bays
- 27 points
- 11 months ago
from completed build Mom's Birthday Build
Given the price, you cannot beat it. One complaint though is that the front panel is connected to the front IO, which means all the cables as well. Therefore it is very awkward when you take off the front panel so installing case fans can be somewhat hectic. If there is a way around this I would love to know. Otherwise, it was a fantastic case to build in. (I built it in the non-tempered glass version couldn't find it on here)
- 23 points
- 13 months ago
from completed build My first PC build!
I love this case! I believe it to be the best budget case there is for under $50! Not only does it have tempered glass, but it also as a PSU shroud, support for radiators, and a nice blue light running down its front! I'd definitely recommend it to budget-minded consumers!
- 21 points
- 4 months ago
from completed build First timer
Awesome case lots of room for cable managment
Weird molex conector for the front leds i didn't even conect it
- 16 points
- 6 months ago
from completed build Outlive
My first tempered glass case. Cable management is super easy for an mATX case. It fits all my components easily. Airflow is great too, and the top and bottom fan filters are magnetic. Even has a window so I can still see the RGB from my PSU.
I took one star off cause the front panel fans don't have fan filters.
- 14 points
- 3 months ago
from completed build The Build That Needs Explanation
Fantastic MicroATX case! Power supply shroud and tempered glass for this price is a phenomenal deal. The front panel is great for airflow and has a nice look to it. You do have the option to not hook the front panel's blue LED strip up if you don't want it glowing.
- 13 points
- 2 months ago
from completed build Budget 1080p Console Replacement
A surprisingly good mATX case. Lots of room for cable management, good airflow, and decent aesthetics. Just wish storage installation instructions were a bit more clear. Either way, highly recommended.
- 11 points
- 4 months ago
from completed build Midrange Blue AMD Build
Great little budget case for $50. Plenty of room for cable management, PSU shroud, and a really nice-looking tinted tempered glass side panel. Good airflow too!
- 10 points
- 6 months ago
from completed build 1080p Gaming Desktop
This is one of the best Micro-ATX cases you can get for $50. IT has a power supply shroud, tempered glass, and really good cable management ( 1 inch of space). Some cons with this case is that the motherboard screws are impossible to hand tighten. The case has sharp edges, the dust filter for the power supply is not magnetic but the fan filter at the top is? This case only includes 1 case fan. If you decide to install your front intake fans inside the case there can be some compatibility issues if the fan is 140mm. The SSD will block the screws for the 140mm fan.
- 10 points
- 5 months ago
from completed build Tundratown
Decent case with a remarkably low price. The side window is edge-to-edge tempered glass, though it's not perfectly flush with the edge of the front panel. Good opportunities for airflow, and its looks aren't too bad. There are removeable dust filters for the top and PSU vents. I took off the top filter and hid it on the bottom of the case using its magnets, since I'm using the top vent as an exhaust and so I want more air leaving the case and don't really need to protect my room from the dust inside the PC.
It's a bit annoying that the front panel and the I/O PCB are stuck together, so cracking open the front means also dragging out the I/O cables.
Although the case can fit 140 mm fans at the front, you need to install them at the front of the case interior, not inside the front panel, since a 140 mm fan positioned midway up will get in the way of the I/O. I think 120 mm fans wouldn't have any clearance problems, but I don't have any to test this.
One quirk of this case is that there's no power LED, so don't try looking for its cable. It has an LED strip at the front of the case that has a molex connector, which you need to connect straight to the power supply.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters