Socket / CPU
PCI-E x16 Slots
PCI-E x8 Slots
PCI-E x4 Slots
PCI-E x1 Slots
SATA 6 Gb/s
Depends on CPU
Onboard USB3.0 Headers
- 48 points
- 52 months ago
from completed build VESA mountable Mini ITX build
Not my favorite motherboard but awesome set of built in goodies. Better than most on the wireless card card placement, connections, reliability. Had trouble with CPU cooler header and some odd issues with USB not working--I'm not sure that wasn't a USB3 extensible driver issue so I'm not knocking off a star for it. Would probably not buy again, opting for ASRock or Asus.
- 19 points
- 42 months ago
from completed build BUDGET BOX V2: MAXIMUM WISDOM BUILD
BEST FEATURES FOR THE MONEY.
7.1 support, RAID support, S/PDIF out, Bluetooth 4.0, A/C WIFI, USB 3..0, all at a conservative price. It's up there with the best of 'em. Any feature not found on this board would justifiably be incorporated at a higher price point model.
It is also of special note that this Mobo supports 64G of (DDR3) RAM... not a common feature for Micro-ITX boards. (tho admittedly not cost effective either when limited to two 32GB dimms)
Just a reminder, no on-board video unless using a graphics integrated APU, so post from your graphics card if using an Athalon X4.
- 17 points
- 47 months ago
from completed build FIREHAZARD V1
I question Gigabyte’s decision to put the CPU socket in such an odd spot. To me it seems like they wanted to make it harder to install an aftermarket CPU cooler with a backplate, because plenty of cases have a hole to put it in, like the Core V1, but I had to strip the entire system to install the H55. I hope I never have to do that again. It did an ok job of overclocking the 7700K to 4.1GHz for about 2 days, then the system froze so I turned it down to 4GHz (most likely because of the PSU). I was testing the overclock for two weeks, and have since turned it off until I need to again. I like the Bluetooth, although Win10 does some strange things with it, so I can’t really have a stable connection between my Android phone and PC for transferring files to and from.
- 16 points
- 57 months ago
from completed build Thermaltake Core V1, AMD, GTX 960, H55, four HD cube.
I've had a few random blackout shutdowns even though my wattage should be well below 450, using different power supplies. I suspect the mobo.
I don't think this mobo can run voltage controlled fans, so the front fan in the thermaltake v1 (200mm 3 pin) is running full speed (800 rpm) all the time. :( Total bummer, this this could be pretty silent.
This mobo only has 1 sys fan out and 1 cpu fan out, so running additional case fans right off the mobo isn't going to happen.
I bought this mobo instead of the a88x Asrock because the Asrock's fm2 socket is pointing 90 degrees from normal, and I wanted the CPU cooler to point to the back of the case to carry airflow through the case. However the Arctic CPU cooler I bought, mounted on this mobo, points 90 degrees from what I expected, hence it points the heat right at the GPU. Also it should be noted that this mobo has the CPU situated very close to the GPU/PCI slot, which limits you to ~92mm fan CPU coolers (about 120mm total width possible).
- 16 points
- 48 months ago
from completed build Entry-Level Gaming Build For A Friend
Probably the best Mini-ITX option available for the FM2+ socket, thanks in-part to the inclusion of onboard AC Wifi and Bluetooth 4.0 as well as the solid black color theme. Plenty of back IO ports to keep you satisfied, and a good range of internal ports. Wish it had a few more fan headers SATA ports, as 4 is a bit limiting (1 SSD, 1 Optical Drive, 2 HDDs) but as it IS a Micro-ITX board sacrifices must be made. Its BIOS isn't as pretty as something from, say, Asus but it is very much easy to navigate and very useful. Power delivery and build quality are outstanding, as is the custom from Gigabyte.
3.8/5 because I want 6 SATA ports :P and because only having 1 chassis fan is inexcusable for a $120+ motherboard (1 header for CPU and 1 for chassis fan).
- 15 points
- 54 months ago
from completed build AMD A10-7850K - Mini ITX. My 1st ever
Small, compact, tight... call it what you want but it fit my case.
Total lack of Linux support annoying. Lost a star for that.
Once I chose Mini ITX and AMD my options were few, but this board has worked fine.
- 11 points
- 34 months ago
from completed build My Ugly Server
It's an alright board that will keep the servers running for a long time.
- 9 points
- 55 months ago
from completed build Sam Gamgee, aka The Steam Box
Nice form factor. Really compact thank to the ITX. The wifi seem to be fine since I used to have connection problem with any small D-link wireless card. Fast look at the BIOS and everything look good.
- 9 points
- 39 months ago
from completed build Gary (Meow v1.0)
Tis got wifi.
Also motherboard supplies a nice simple UI for overclocking, simple boot management.
Also supplies 1 DVI-D, 2 HDMIs.
- View Compatible CPU Coolers
- View Compatible CPUs
- View Compatible Cases
- View Compatible Memory
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters
- AMD Athlon X4 860K
- GeForce GTX 950
- AMD Athlon X4 870K
- GeForce GTX 760
- AMD Athlon X4 750K
- Radeon HD 7870 GHz Edition