add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube

Comments

Comments

Comment reply on DocH's Completed Build: Mighty Mouse

  • 3 hours ago
  • 1 point

Just used some glue and magnets

Comment reply on DocH's Completed Build: Mighty Mouse

  • 26 days ago
  • 1 point

that a full size psu friend. The seasonic focus is one of the smallest full sizes you can get. The glass side panel was super easy to cut, just went to home depot got a glass cutter and a sheet of glass for $10. The painting was a little painful as the painters tape didn't do its job.

Comment reply on DocH's Completed Build: Mighty Mouse

  • 1 month ago
  • 1 point

A man can only dream but I believe the build went under the radar

Comment reply on DocH's Completed Build: Mighty Mouse

  • 1 month ago
  • 2 points

Cerberus x case

Comment reply on Kwerpi's Completed Build: The Twins

  • 2 months ago
  • 1 point

Thanks for the info!! I was thinking the same thing. So I would have to rotate the front rad with ports on the top. I am cooling a 7900x with direct die so gotta maximize rad space. Just wasn’t sure if the 280 and 240 hardware labs would fit. Looks very close

Comment reply on Kwerpi's Completed Build: The Twins

  • 2 months ago
  • 1 point

Hey I am getting ready for a build in this. My question is can you slide one of those 240mm rads under the other? I am thinking of a 280mm + 240mm.

If it is close I think it might be possible with the ek 240 se and ek 280 se. both are 28mm thick instead of the 29.5 from hardware labs.

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 2 points

I would say quality wise much better than ek. The plexi is much thicker so it would be harder to crack. They use acetal were fittings go in to avoid this issue as well. Also a lcd monitor on the hub is quite nice. I am shocked by their quality

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 2 points

yes yes you did lol

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 1 point

it was only to get natural light for the photos. it sits on my desk which you can see in the dark photos

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 1 point

that is a good looking pc you got there

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 1 point

I know it is being used through my asus aura. I am assuming it working with any motherboard controller and it comes with its own controller as well.

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 2 points

The finalmouse air58 ninja, and the reservior/waterway is in the parts list.

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 8 points

crikey, ain’t she a bewt.

Comment reply on DocH's Completed Build: Polar Ice

  • 7 months ago
  • 23 points

Why you gotta state so many facts in one comment. The universe could have exploded from all that information

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 12 months ago
  • 1 point

I made a custom aio cooler for the card using some acrylic and two 80mm fans. The card with heatshink will fit in the s4 classic but won’t fit when the shroud is on

Comment reply on Upora's Completed Build: Project Tru Blood 2.0: A Plexi Refit

  • 16 months ago
  • 1 point

great build i love both those cases. Do you notice a sound difference switching to the R6?

Comment reply on DocH's Completed Build: Lian Li PC-O5SX

  • 17 months ago
  • 1 point

So i ordered a usb 3.0 splitter from moddiy and a 3.0-2.0 adapter.

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 21 months ago
  • 1 point

its not as thick as the dell but it is much wider. overall it is bigger. good luck finding a voodoo they are near impossible to acquire.

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 25 months ago
  • 1 point

i dunno i had royalba complete them. look on the SFF network for him he does them at a good price or would tell you the lengths

Comment reply on DocH's Completed Build: Lian Li PC-O5SX

  • 25 months ago
  • 1 point

sorry i no longer have this build together. I would say you need to stick to the ddc pump with the 100-110 reservoir. Maybe something bigger may fit but i cannot confirm

Comment reply on Forum Topic "Parting out my build... Everything must go! 7900x, 960 Pro, x299 etc..."

  • 25 months ago
  • 1 point

Have the ram still I’ll pick it up if you do

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 25 months ago
  • 2 points

i absolutely love it. there really is not other way to take this much power wherever you go and it looks great because it doesn't eat desk space. i built a rendering monster so i moved this over to my 4k 55" tv

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 26 months ago
  • 1 point

You really are clueless mate. Who said I game at 1080p? i was just benchmarking on my portable monitor which i travel. I have a 1440p ultrawide monitor. Yes the 7700k was the best cpu i could put in it based on my limitation for power draw and cooling. Anything bigger i would have difficulty cooling. I get the full boost at 4.5ghz and have zero cooling issues. Prime95 which is a unrealistic scenario test on a cpu hit 85C. I get around 60-70C on gaming. The idea of the build was the make the smallest rig that will destroy most other builds but that concept seems to have missed you. You also probably didn't know that this z board was the only board that could run two m.2 in raid 0. Asus has now released a b board but at the time it was not around. You sir obviously didn't do your "research" and no you couldn't get a build like mine with half the money. time for you to get edumacated. i hope you see what i did there

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 26 months ago
  • 1 point

I don't believe it is am4 compatible you would have to check on id cooling site. The cooler is alright I picked it only cause I hated to cooler of the noctua cooler

Comment reply on orbitalwalsh's Completed Build: Parvum: Frosted Designare- Teaser!

  • 27 months ago
  • 1 point

how are the honey comb radiators? They had pretty poor cooling performance on the reviews but they look so cool.

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 28 months ago
  • 1 point

the 1080 is more than enough power. Also you could run into some power spike issues with the DC-DC power supplies and that setup. It will take some testing and i just did this build so no reason to get a 1080 ti.

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 28 months ago
  • 1 point

true but you can't run raid 0 with a single drive. So i use two m.2 to reach a faster write and read speed by raiding them,

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 28 months ago
  • 3 points

actually i have it running at a full 4.5 turbo under prime95 at 84C. It is delidded of course. So while the 7700 has a lower tdp rating it does not hit the 4.5hz mark.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 2 points

This build was done before there was even a 10 series out. At the time 980 Ti was the best and still are fantastic cards. I just uploaded it now so everyone can check it out and hopefully give some people ideas for builds.

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 29 months ago
  • 1 point

yeah it even annihilates the new xbox one x. Poor consoles are so far behind. They are like glorified streamer boxes for netflix

Comment reply on DocH's Completed Build: Lian Li PC-O5SX

  • 29 months ago
  • 1 point

sorry for the delay. I is just sitting at the bottom of the case not mounted. I didn't want to drill holes in the beautiful case. Plus i don't move my pc to much so there is not issues. Even then it is a tight fit in front of the gpu and how i ran my pipes i hardly budges

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 29 months ago
  • 1 point

30db while playing games so not to bad at all. This is after the delid and everything

Comment reply on Vulpixeon's Completed Build: Pawn Shop Find

  • 29 months ago
  • 3 points

i would recommend changing your fluid as it looks old and has separated in the reservoir. Could potentially clog your pump and break it or get stuck in blocks and cause overheating.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

Sorry for the delayed response. I would recommend against a 250 reservoir. It doesn't look good in my mind and is way to big for this particular case. It can be done if you don't do a pump res combo but there really isn't a lot of room for it. You would have to mount the pump separately solo under the gpu and the reservior on the radiator. The sweet spot for this case really is 150mm reserviors. If you do the pump bracket there is no way to do a 250mm with pump reservior combo.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

I would be lying if i didn't get some inspiration from cars. You can never go wrong with black and chrome it is classy.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

I drilled holes in the case to mount the pump on the back wall and low as possible. I would recommend getting a pump mount to mount to the front rad. You will achieve a similar look without the drilling. There was no modding to the case otherwise. You can also do a aluminum plate mod to get a bigger rad on top without adjusting the case but that does take some skill but would be more than happy to share.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

Thanks! yeah i wanted a clean look and decided black and chrome does just that. There is white and grey of course but it all blends in for a nice look. I am really happy about the build. The black liquid really adds that touch and i wanted to show the before and after.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

I thought that too, but i have two 140mm pushing in. There are furious F4 and are beastly. Also there is major air restriction on top of the case so really the dust hasn't been as bad as i had anticipated. But i thought the same thing as well going into it.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

It was definitely worth it. If you can go some time without the pc while you are doing the build i highly recommend it. Yeah it is pricey and you wont see much if any performance over an AIO but is it worth it. I finally did the jump when i thought i can reuse all the materials for all my future builds. Don't let bending tubes scare you. You will waste some tubing but it isn't difficult just time consuming. Everyone has to start somewhere. I really don't know about the SSD as i mostly just game so SSD speeds don't play a large role between each other. EK just came out with an all aluminum kit that is very reasonably priced. There is no feeling once you done and you see the piece of art you made. Just make sure you do your research before starting.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

That means a lot thanks!!

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

I didn't have much issues. I followed a video EVGA made for the board and the intel 6700k. Not sure if it is around but you may be able to find it. I set it to 4.5 and didn't think twice about it. It is possible you just got a lemon chip maybe. I feel that it is low though and shouldn't be having those issues.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

oh it's my second build that has been featured. :) not the same build

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

Definitely saw it had some clean runs. I am just OCD so i wanted everything to be perfect which is why i got the kits. There were a two bends i couldn't use the kit for but all in all i recommend it.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 1 point

i left it at 3200hz. I am sure i could have pushed it faster but i just wanted to declare a war on heat everywhere.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 2 points

Thanks for the tip. What I did since I had the bending kit is I marked both sides of a piece of wood with lengths in a 90° angle. Once I measured it in the case I then used that measurement on the marked board to bend in the exact spots I wanted. For the most part I never had to do a bend twice except for one pesky run. I'll try your suggestion in the future.

Comment reply on DocH's Completed Build: Old Glory - Phanteks Enthoo Evolv ATX TP

  • 29 months ago
  • 3 points

Thanks!!! yeah you really don't and i thought it added some flair to the build.

Comment reply on luka.volovec's Completed Build: Craziest (Workstation & Gaming)

  • 29 months ago
  • 1 point

no problem. I did the same thing with my build. There are two ways to do it one involves modding the actual case and drilling holes. The other is easier and doesn't. if you interested let me know and i can explain it better.

Comment reply on luka.volovec's Completed Build: Craziest (Workstation & Gaming)

  • 29 months ago
  • 1 point

great build i did something similar. Only downside is i feel your top radiator takes up so much real estate when looking at it. Otherwise clean and well done. if you remove the radiator mount on top and take two long pieces of aluminum you can pull that top radiator up higher out of the way. it a common mod everyone does for this case.

Comment reply on DocH's Completed Build: NFC S4 MINI Rare Bread 4.3L

  • 29 months ago
  • 1 point

If you CPU doesn't go over 60C you do not need a delid. My cpu was hitting 100C on prime95. I switch the cooler out and did the delid. It tops at 84C under full load on prime 95 after ten minutes. So the delid helped me quite a lot. But i would not recommend it unless you absolutely needed it,.

Comment reply on ApocPony's Completed Build: Soaring Raven

  • 29 months ago
  • 1 point

+1 for a clean small build.

Sort

add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube