add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube

Comments

Comments

Comment reply on Fr0st_Byte's Completed Build: IT Work PC - Linux

  • 5 months ago
  • 1 point

I agree! Thanks!

Comment reply on Fr0st_Byte's Completed Build: IT Work PC - Linux

  • 5 months ago
  • 1 point

Thank you!

Comment reply on Rittenhousec's Completed Build: Brick 2.0

  • 5 months ago
  • 1 point

Looks good! Question, are the SATA data connectors on your hot-swap controller not both vertical? I just got this case and am building in it as well, and both the connectors for me stick straight up, so it was impossible to use an L shaped connector there. Love the paint job! What did you use to do it?

Comment reply on Julianplayz01's Completed Build: PROJECT: Quality Server

  • 7 months ago
  • 1 point

Nice build. What storage went into the Rosewill Hard Drive cages? How are they doing? I'm debating on picking one up for a small NAS build myself.

Comment reply on Forum Topic "Filter Motherboards by Number of Fan Headers"

  • 12 months ago
  • 0 points

Awesome! Glad to hear it! [STAFF REMOVED]

Comment reply on Forum Topic "Filter Motherboards by Number of Fan Headers"

  • 12 months ago
  • 0 points

I always go to the manufacturer's website and check out the manual. But for new guys getting into PC building, being able to easily figure that out would be helpful. It's not that important for me, but I figure the noobies would benefit from it.

Comment reply on Fr0st_Byte's Completed Build: $1200 Budget

  • 12 months ago
  • 1 point

This isn't my rig, I just built it for a customer. Honestly unless you do a custom loop, you are just as well off in my opinion buying a high quality Air cooler. I had a Contac 12(?) From Thermaltake on my Ryzen rig, and an H55 from Corsair. Same temps, and at the time a $30 price difference. Air cooling is the way to go if you aren't doing a custom loop in my opinion.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 12 months ago
  • 1 point

I'm more of an AMD guy myself. I know the i3-8350 is only around $170...but I'd rather buy a Ryzen 5 2600 for that price.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 12 months ago
  • 1 point

Just a heads up, if you go to a motherboard manufacturer webpage and look at the page for a board or it's manual you can see how many headers it has. That way you're not waiting on a reply on here. Good luck.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 12 months ago
  • 1 point

I built the machine and gave it to the customer within a few hours, but if my memory is correct it only has one chassis fan connector. You'd definitely want a fan controller for this board. This is the one I personally have, the NZXT Grid+ v2, and I can vouch for it. Control the fans via NZXT CAM software. But, in a pinch I'd say this one or this one would work out great.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

It comes with a cooler, a stock air one.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

Just one system fan header.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

Thanks!

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

Oh, I know, I was just saying for anyone else reading comments. lol.

Comment reply on Flika1999's Completed Build: Chicken Coop - First Build

  • 13 months ago
  • 1 point

Nice build! Looks good too!

Comment reply on Flika1999's Completed Build: Cardboard Box PC

  • 13 months ago
  • 1 point

It's definitely different...I like it!

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

It's surprising. Still nothing compared to having a good GPU, but if someone was in a pinch it'd be fine for low res gaming. I wanted to actually do some benchmarks on it, but from the moment the parts came in, I had it built, with Windows, and at the customer's home within 3 hours.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

This rig wasn't meant for gaming, so it's perfectly fine. The most gaming it may ever see is Minecraft and Candy Crush. I'd never build a gaming rig for someone with only an APU unless they absolutely knew and understood what they were getting.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

shh...

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

Yea, I have it in a FreeNAS box and it never breaks a sweat feeding files to about 14 different machines 24/7 at work. Good little chip.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 1 point

Thanks, I did what I could with it. The case isn't that bad, it definitely isn't a go-to option of my own, but for their budget I took a shot with it.

Comment reply on Fr0st_Byte's Completed Build: Budget Office Work PC

  • 13 months ago
  • 2 points

They're gone! Just left on for the customer lol. Thanks!

Comment reply on Fr0st_Byte's Completed Build: Budget NAS for Work

  • 14 months ago
  • 1 point

It's only been a month...

Comment reply on Fr0st_Byte's Completed Build: Budget NAS for Work

  • 15 months ago
  • 1 point

Okay, your statement is correct. However there are no on-board graphics with that CPU so I would also have needed a GPU. Using the 2200g, I save money from a GPU and PSU stand point. There is a reason I picked that CPU.

Comment reply on Fr0st_Byte's Completed Build: Budget NAS for Work

  • 15 months ago
  • 1 point

I'll sure try to remember!

Comment reply on Fr0st_Byte's Completed Build: Budget NAS for Work

  • 15 months ago
  • 1 point

Boss(es actually) won't be in till Tuesday, but they're excited for it. I'm sure they're going to like ditching small flash drives and having actual backups of data. FreeNAS install went perfect. I'm getting somewhat slow transfer speeds (gigabit network, so not sure why I'm only able to push about 10mbps) but it works perfect other than that. I'm not sure I'd recommend this CPU for anything other than it's price point. VMs would want to have more cores or at least threads. I'd go for at least the 2400g for the extra threads if you're gonna run more than one VM. For us, all we needed was an SMB share for about 15 computers, so this CPU should be fine.

Comment reply on Fr0st_Byte's Completed Build: Budget NAS for Work

  • 15 months ago
  • 1 point

Thanks! Seems okay, I've literally just booted and installed FreeNAS though. Had enough fan headers for me, wasn't DOA, so all in all I liked it. I can't speak on overclocking or anything cause I won't be using it for that.

Comment reply on EvanC12345's Completed Build: My First Ever PC

  • 16 months ago
  • 1 point

Congrats on ascending! Good job!

Comment reply on Fr0st_Byte's Completed Build: $1200 Budget

  • 16 months ago
  • 2 points

For the price they're great. Front air intake isn't great like a mesh panel but it isn't bad at all. This is the third build I've done in this case.

Comment reply on Fr0st_Byte's Completed Build: $1200 Budget

  • 16 months ago
  • 1 point

Thank you!

Comment reply on Fr0st_Byte's Completed Build: $1200 Budget

  • 16 months ago
  • 1 point

Thanks! I agree!

Comment reply on Fr0st_Byte's Completed Build: Fr0st | Ryzen1800x | R9 380 4GB

  • 28 months ago
  • 1 point

It's in the part list under custom parts. Works pretty well but now I have the H55 installed in push/pull.

Comment reply on Forum Topic "Ryzen Cooler/RAM Clearance?"

  • 31 months ago
  • 1 point

How hot does the 1800x run? I have the H55 in push/pull on an old overclocked FX-6300 and get good temps with it, that's why I assumed it would be okay for the 1800x at stock or mild overclock.

Comment reply on Forum Topic "Ryzen Cooler/RAM Clearance?"

  • 31 months ago
  • 1 point

Any suggestions then? Even for stock speeds?

Comment reply on Fr0st_Byte's Completed Build: $2200 Gaming Machine

  • 31 months ago
  • 2 points

Unfortunately this isn't my build. I made this for a co-worker. I have no idea how the GPU fans have been, bud. Sorry! While testing the build I didn't notice the fans though.

Comment reply on AninoGaming's Completed Build: Niece's First Rig: Vaporeon

  • 32 months ago
  • 1 point

Nice build! Not bad for hand-me-down parts!

Comment reply on AldoApache's Completed Build: Ryzen Up (First Build)

  • 32 months ago
  • 2 points

I've used both configurations, and find little to no difference in CPU temps between the two. I do suggest a push/pull configuration if you're using it as exhaust, to help really cool the fins of the radiator. I use this radiator screw set to mount a second static-pressure fan to my H55.

Nice build; welcome to PCMR!

Comment reply on Fr0st_Byte's Completed Build: $2200 Gaming Machine

  • 32 months ago
  • 1 point

Thank you! As far as the fans, easily. There are mounts for two up top. Wouldn't be pointless; odds are you'd just have 3 exhaust and 2 intake creating negative air pressure, so might get some dust build up around the case cracks and edges.

Comment reply on Luimallozzi's Completed Build: The Bargain Build (my first build)

  • 32 months ago
  • 1 point

Most LED strips will connect with a 4-pronged connector, like this one on the newer ASUS motherboards, or will connect to a 'power source' which will then connect to a molex or SATA connector. If you look at my build, Fireball, you can see my RGB strip's IR Receiver/power supply just underneath the 24pin connector on the motherboard.

If you're going to need more fan headers, consider getting a good fan controller like the Grid+V2. I use it in my system, and it helps a lot being able to keep the fans from just going 100% all the time. My motherboard has just one fan header besides the CPU fan header, and I used a Y splitter for a while. This was great, but my fans ran at full load all the time, which meant more noise and more dust.

Comment reply on Zagna's Completed Build: Litil Divil v4.0

  • 32 months ago
  • 1 point

Yea, I'm impressed with the temps!

Comment reply on Zagna's Completed Build: Litil Divil v4.0

  • 32 months ago
  • 1 point

Love the TeamRed support! Case and stickers are on fire! ;p Nice build, but I'm curious how your temps are in that case??

Comment reply on Luimallozzi's Completed Build: The Bargain Build (my first build)

  • 32 months ago
  • 1 point

Your airflow looks good to me! That's the same fan setup I used in the build I did with the 240. You ever consider LED strips instead of the fans? I feel like they look better, but that's just my opinion!

Comment reply on Luimallozzi's Completed Build: The Bargain Build (my first build)

  • 32 months ago
  • 2 points

Good job! I love that case, I've used it before myself. Congrats!

Comment reply on MuchLinux6500's Completed Build: First Desktop/$650 Gaming Skylake

  • 33 months ago
  • 1 point

Great! Glad to help!

Comment reply on MuchLinux6500's Completed Build: First Desktop/$650 Gaming Skylake

  • 33 months ago
  • 1 point

Are you certain the card is fully plugged in? The machine should still boot even with the addition if a GPU. Is there a chance the GPU is bad? Do you have a second machine to test it in?

Comment reply on MuchLinux6500's Completed Build: First Desktop/$650 Gaming Skylake

  • 33 months ago
  • 1 point

Try this YouTube video out, see if it helps you.

Those color-coded channels are for dual-channel memory. You get a slight performance increase, but nothing to really worry about.

Comment reply on Fr0st_Byte's Completed Build: $2200 Gaming Machine

  • 33 months ago
  • 1 point

It definitely becomes addicting!

Sort

add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube