Thank you! It means a lot
It actually has rgb and it's seen rather well. There is a node pro tied to rgb on the gpu's and cpu as well as a strip all the way around the parameter of the inside. Not too sure by the "so crammed" statement as in person there happens to be plenty of space left. But to each their own. Thanks for the compliment... At least I think it's a compliment..
Actually they get the exact same amount of coolant. The flow runs into the first block and then once it's full it's pushed to the second. Once both blocks are full the flow then exits both simultaneously. Fluid dynamics can be a bit tricky and sometimes things seem as though they shouldn't work when they do but both get cooled the same and temps are great between both cards. Usually you'll see a 2c Delta between the first and second and that's only because the first card sees more of a load than the second as a general rule. But no, no proportioning valves. Just good old fluid dynamics and good loop planning. Lol hope this helps
Thank you for the compliment!! I truly do appreciate it
Thank you! Glad you OCD is pleased. Mine is as well. Lol
Thank you!! The compliment mean a great deal I assure you
This was a sponsored build so I kinda had to show the love with decals. Lol However, thank you for the compliment. It means a lot
Thank you!! I certainly plan to!
Thank you very much! I appreciate the compliment
Thank you!! It is a monster. Doesn't get moved much. It's just too heavy. Lol
Thank you! It's one of my favorites as well. I own a black and white version and love them both!
Thank you. I'm glad you like it!
Thank you I do appreciate it
Thank you, I appreciate it!
Thank you again!!
Yes it is. Bitspower ram waterblocks. Thank you. I liked the yellow too. Different and you don't see it every day. Lol
It wasn't intentional by no means. Lol it just kept getting heavier and heavier. It has almost a gallon of coolant alone. It's a monster to say the least. Lol
I like questions! Some are personal, some are client but most are my own personal builds because I can't seem to find one I can stick with more than a couple days.LOL
The cards you see are old Radeon 8800 AGP cards I use for mockup. Those I've had for a very long time.
Thank you again! The compliments truly mean a great deal. I am very much appreciative of all the positive feedback I've received in the short time I've been sharing here!!
I will find a better shot of the SLI config and upload it for you
Thank you very much!!
Thank you! I have several others I plan to share. I have a pretty extensive portfolio of builds I have accumulated. I really do appreciate all the compliments I've been given by you and many others. It means a great deal. It's one thing to build and enjoy what I do but it's something quite different to share that work with others and have them enjoy it as much or more than I do. Thank you again!!
Not very often no. Worked really well!
LOL, these are builds I've done within the last year. I still have more. A few more actually. I do one about every couple weeks to a month. Some take longer than others of course but I usually do one a month for sure. Thank you again! I do appreciate the compliment!
I feel your pain. This one has 2 360mm rads and 7 fans and still gets pretty warm. But I haven't had any crashes because of high temps thankfully. But all in all a bad design choice on Phanteks part for sure. Such a beautiful case hendered by poor air flow. Glad they did a redo of this case and solved the issue
Thank you again! I'm glad you like my builds. Means a lot!
Nah, both are blocked and on water
Thanks!! I'm glad you like it
Thank you!! I appreciate the compliment
LOL, Hope you find some you missed in the back of the drawer
Lol, yeah, I have 4. Great boards. Still use a couple of them today. Funny, they're only a couple years old but in terms of PC hardware that's pretty old. Lol thanks for the compliment though!
Thank you!! I appreciate the compliment for sure!
Thank you. That means a lot! I really appreciate the compliment!
Yes, it is in fact 2. I custom made a mount that would enable me to mount 2. Thank you for the compliment!!
Lol, well, I'm glad you did! Thank you!
Thank you very much!
Surprisingly, the Delta between the cover being on and off is only 5 to 6c. I had planned to add better air flow but didn't think a 5c difference warranted it and preferred a clean look instead.
Thank you for the compliment/constructive criticism! I plan to redo my logo, I just haven't gotten around to it. Thank you for the up vote nonetheless!
The way I have done this is to create a parts list and then save it. Then go to the completed builds link and create a completed build by clicking the link in the top left. You'll then be able to choose which saved build you want to use and edit this by adding a title, description, and pictures etc. Once thats done it will need to be approved by a site moderator which may take a few hours. Once approved your build will be live and show in the list of completed builds. Hope this helps