All you need to do is blackout the adhesive on those clips with a marker. =D #ocdtrigger
That is by far the best cable management I've see in this case so far. Taking notes for when I begin my own in this case - hopefully next weekend!
Your cable management looks great considering the limitations of the case - it looks like you have spent a lot of time getting things straightened out!
Interesting... That's opposite to the InWin recommended setup of intake on the bottom and exhaust front and back. Have you tried that way as well?
Looking at the pictures, the bottom exhaust fan is pulling air away from the GPU fan - would it be better to have the air pushed up into it?
Is that a LED strip at the back specifically to shine out of the hex cutouts or is is just ambient light in the case shining through?
Random question - do the feet come off the bottom without some serious modding? I want to lay it horizontal if possible - as long as I can make the base presentable.
Any reason you changed the stock pressure fan on the rad out for a case fan? (Apart from the pretty shiny, that is)
Hows the interaction between the 120 rad and the 200mm fan? No issues with airflow, or noise of two different fans?
Do you have any problems with having a 120 rad on one side of the front panel and the 200mm on the other? Any sort of random airflow issues or noise increases from the two different speeds?
Glad i found this build log before I bought all the things for my next project!
swaps the M9i in the cart for the H7
I can see you only used one verticsl Sata port for the one SSD - is there room to use the horizontal ones next to the 24 pin, or does the PSU and cables block them off?
Did you swap out the LED in the case? It looks more red in yours than the orange in all the other images I have seen.
Sweet thanks - in no way would it have been a deal breaker but it's nice to know.
I know you liked the orange LED on the front, but did you work out if it COULD be changed?