PCPartPicker

  • Log In
  • Register

Comments

RyoKaida's Completed Build: Fat Cube/First Build

SJW96 2 Builds 2 points 2 months ago

Nice build man +1

Also, I may be wrong but it appears as if those 3 arctic fans are actually setup as intakes contrary to your description :)

adamarice's Completed Build: Compact Budget Gaming PC

SJW96 2 Builds 2 points 3 months ago

OP didn't set prices so it just displays current prices

daltonsollars's Completed Build: HoneyBeeTuf (first build)

SJW96 2 Builds 2 points 5 months ago

Don't get me wrong, seeing builds double the price with custom loops are cool and all, but you gotta appreciate really well thought out, balanced and great looking builds like these. +1

SJW96's Completed Build: Small PLUS Mighty

SJW96 submitter 2 Builds 1 point 7 months ago

Unfortunately this build has since been rebuilt into a different case due to upgrading to a better GPU :(

There are standard mounts for a 3.5inch HDD on the floor of the case only. However if your CPU is 20mm lower then I really doubt it will fit, but it's hard to say.

Racerover's Completed Build: "White Monster" Mini-ITX Gaming Build

SJW96 2 Builds 1 point 7 months ago

Beautiful. But I would say that those Corsair AF fans are not up to scratch compared to some 140mm Noctuas (I've used both!). The NF-A14s would move more air at the front due to better static pressure :)

xFinn87x's Completed Build: Minimalistic Budget Build

SJW96 2 Builds 2 points 7 months ago

Very nice, but let's see the PC

SJW96's Completed Build: Small PLUS Mighty

SJW96 submitter 2 Builds 1 point 10 months ago

The desk never used to be that neat xD

SJW96's Completed Build: Small PLUS Mighty

SJW96 submitter 2 Builds 1 point 10 months ago

For CS:GO, very easily. Overwatch for example, I run with mixed settings at about 150. Really depends on the game. The G sync helps regardless.

SJW96's Completed Build: Small PLUS Mighty

SJW96 submitter 2 Builds 1 point 10 months ago

It does require an adapter, but it makes cable management so much easier, it meant I could tuck 3 SSDs behind it, and cables to the left of it, also.

The cooler does bits, especially with the second fan, it means you can run them at the lowest RPMs possible. If I'm not mistaken you could probably fit a larger noctua cooler in this case. I believe I've seen a 120mm fan tower cooler before in a similar build!

Dude, considering you used a full atx semi modular PSU, your build is very very neat indeed. I wish I had the patience to cable manage like you did xD

SJW96's Completed Build: Small PLUS Mighty

SJW96 submitter 2 Builds 1 point 10 months ago

Thank you, I believe I up voted your build in the past! Very clean

SJW96's Completed Build: GET TO DA CHOPIN

SJW96 submitter 2 Builds 1 point 14 months ago

A couple of mm? It's not a very fine mesh so wouldn't choke it, if that's what you're concerned about.

SJW96's Completed Build: GET TO DA CHOPIN

SJW96 submitter 2 Builds 1 point 15 months ago

It was about £80 from Overclockers. Which is a decent price for an ordinary case and psu anyway, don't think I could have done any better for that choice at the time tbf

SJW96's Completed Build: GET TO DA CHOPIN

SJW96 submitter 2 Builds 1 point 15 months ago

Only takes 2 2.5 inch drives! Regarding your question on power draw I would imagine about 50-100 W for everyday use, under full artificial load it is well within the PSU's capability, though I don't think you could get away with much more if you added a second drive.

SJW96's Completed Build: GET TO DA CHOPIN

SJW96 submitter 2 Builds 2 points 15 months ago

The whole idea was to build something that would last and be more quiet and reliable :)

SJW96's Completed Build: GET TO DA CHOPIN

SJW96 submitter 2 Builds 1 point 15 months ago

Testing using prime95 for about half an hour never saw the cpu go over 60/65°C

RGT19's Completed Build: 2016 Mini ITX Skylake non-K Gaming PC

SJW96 2 Builds 1 point 34 months ago

Quick question, I don't suppose it's possible to mount the GPU rad/fan in the front (possibly with the pump tubes going under that little res/2.5"drive stand)? I am thinking of getting a hybrid 1070 in the future (when it comes out) with this case and want to minimise fans as much as possible. Thank you in advance. Nice build!

jipster69's Completed Build: You Never Forget Your First Time

SJW96 2 Builds 1 point 44 months ago

Having the same motherboard myself, and after changing the appropriate settings for the CPU (unlocking it, etc etc) I can't seem to manually overclock my FX-8350 processor on this mobo. Which BIOS are you using? I have given up on trying to overclock it.

Also, really nice build, the case and the sleeved cables look very nice. I really like your whole set up to be honest; the desk with all the rubix cubes are awesome. It looks both practical and good to look at.

Page
1