PCPartPicker

  • Log In
  • Register

Comments

Forum Topic "Custom Water Loop Problems"

Tooth 1 Build 1 point 25 days ago

I am no expert on this but you have the 240 rad sitting below your pump. In fact, the pump is sitting at one of the higher locations of your loop.

Forum Topic "Custom Water Loop Problems"

Tooth 1 Build 1 point 25 days ago

i wonder if not having the pump at the lowest level is the issue. Or..you need a stronger pump.

do you know at this point what is the pump speed level? could it be at the lowest speed and you need to setup the higher stronger pump speed?

I was able to change this speed of the pump within motherboard bios

Forum Topic "PWM cable plugged in while filling loop"

Tooth 1 Build 1 point 25 days ago

ok, i did miss understood, my bad

if you have the bridging atx plug, you are go to go with the pump cable

dont need the rgb cable at this point.

that plug prevents any other current running into your system if they were plugged into your motherboard

Forum Topic "Loop filling question"

Tooth 1 Build 1 point 25 days ago

ok, i did miss understood, my bad

if you have the bridging atx plug, you are go to go with the pump cable

dont need the rgb cable at this point.

that plug prevents any other current running into your system if they were plugged into your motherboard

Forum Topic "Loop filling question"

Tooth 1 Build 1 point 26 days ago

i answered your same question you already posted

Forum Topic "Custom Water Loop Problems"

Tooth 1 Build 2 points 26 days ago

have your rocked your computer case in all 4 directions to move the air pockets out of the tubing? Just dont let the water run out of your open reservoir :)

I only fill the reservoir half full and rock out the pockets of air, then fill and cap off the water resevoir

Forum Topic "PWM cable plugged in while filling loop"

Tooth 1 Build 1 point 26 days ago

ek provided a jumper to your motherboard cable so you one run what is necessary.

"- ATX bridging plug"

Forum Topic "Three RTX 2080 Ti's"

Tooth 1 Build 1 point 1 month ago

are you currently playing games on 3 monitors? If so, fewer games support triple monitors

Forum Topic "PC freezing with new GPU installed, works with old one"

Tooth 1 Build 1 point 1 month ago

"disable the integrated graphics"

post your specs.......power supply......

How can I determine the PSU wattage of Aurora R3?

If you bought it new from Dell, you can look-up your Original config at http://support.dell.com by Service-Tag

fireleet's Completed Build: [SUPREME 2019 BUILD] Heisenberg - Blue Sky Methafetamina (i9 9900K + RTX 2080TI FE)

Tooth 1 Build 1 point 1 month ago

why did you hog tie your cables!!!

fireleet's Completed Build: [SUPREME 2019 BUILD] Heisenberg - Blue Sky Methafetamina (i9 9900K + RTX 2080TI FE)

Tooth 1 Build 2 points 1 month ago

ignore above comment, you did a great job. I also appreciated your 10 pics and not those builds with 74 or more pics :)

Forum Topic "Black Friday"

Tooth 1 Build 1 point 4 months ago

you can see the black friday ads NOW!!! Dont have to ask, already in print

where do you shop?

Forum Topic "Geforce experience opens, but only for a moment."

Tooth 1 Build 2 points 4 months ago

are you logged in or out of Nvidia GeForce? Log out

update Geforce and your video card drivers at one time. Your Video card new drivers will give you option to update Geforce Experience

Forum Topic "Destiny 2 is now free until 18 November"

Tooth 1 Build 1 point 4 months ago

thanks!

added

Destiny 2 Standard Edition

Bee66's Completed Build: DeeBee Xtreme - Node 202 Complete CPU & GPU Watercooling

Tooth 1 Build 1 point 5 months ago

That is one slick looking case with the window. Nicely done!

Forum Topic "2080/2080 ti video card pricing thread"

Tooth submitter 1 Build 1 point 5 months ago

MSI Video Card G2080SHX RTX2080 SEA HAWK X 8GB GDDR6 - Liquid Cooled

$954.99

https://www.rakuten.com/shop/thekeykey/product/222526/

did not think this liquid cooled card was out, says 2 left :)

Forum Topic "XCOM 2 issues, anyone able to help?"

Tooth 1 Build 2 points 6 months ago

dont guess, look in your control panel, programs, to see what versions of visual is installed

update game could be your solution

Forum Topic "XCOM 2 issues, anyone able to help?"

Tooth 1 Build 1 point 6 months ago

try turning vsync OFF

how to measure your gpu usage?

Have you done the following:

1-did you update video card drivers?

2-did you update Microsoft Visual C++ 2015 BOTH 32 and 64bit?

3-Is Microsoft NetFrameWork v4.5 installed?

4-did you update DirectX?

5-install the latest game patch?

Forum Topic "Games keep alt tabbing randomly"

Tooth 1 Build 1 point 6 months ago

if you have one monitor, hit ALT+ENTER = maximize game screen

Forum Topic "M.2 sharing a bandwidth with SATA 6GB"

Tooth 1 Build 2 points 6 months ago

it is a specific sata slot, read the manufacture manual for details

"Can I just connect to whichever SATA ports I want as long as I leave one empty?"

if you do this on a shared sata, one will not work

Forum Topic "Server CPUs vs standard desktop CPUs"

Tooth 1 Build 1 point 6 months ago

I see a rise of "gaming systems" with older server cpu's due to the cheap pricing. Then they ask, "I just got a new cpu, and my games suck". These 7 year old cheap servers and not really able to handle todays AAA games.

I know this is a general statement, but when a problem does come up, the have a outdated server cpu.

Forum Topic "whats this?"

Tooth 1 Build 1 point 6 months ago

the motherboard does not have a dedicated slot for each type of connection. So the M.2 is "shared"

with my two m.'s, I lost 1-sata slot, 2-video card slot (if I remember). So I made sure I had plenty of sata connection to fit in the m.2 drive and many hard drives

From page 15 of your manual: the M.2 slot will disable SATA3 0 (first sata). you have a total of 6 sata connection, 5 left

Forum Topic "RTX2080 Question(s)"

Tooth 1 Build 1 point 6 months ago

I am not going to wait, but if you didnt ask for help, then I took it wrong.

Best of luck

Forum Topic "RTX2080 Question(s)"

Tooth 1 Build 0 points 6 months ago

DUDE! Chill out! Dont get stressed out now, wait till you dont have product available.

As I stated earlier, if this is a repeat of the launch of the 1080 --->>BEWARE

You are not the only one that pre-ordered on a limited supply.

You have too much stress over this. Hope your day is better. No smile to be considered per your request.

Why I asked which card you ordered, I was going to check the quantity for you. You still didnt tell me the manufacture. did you even order?

MEC-777's Completed Build: Rustic Rat Rod PC

Tooth 1 Build 2 points 6 months ago

152 pictures? I wont live that long! :)

Note, you have a termite trail in one of your boards

Forum Topic "3x displays at 1440.........what do you need to run this?"

Tooth 1 Build 1 point 6 months ago

You should be aware, not all games support 3 monitors

check out wide screen gaming forum:

http://www.wsgf.org/

Forum Topic "Picking between these four cards?"

Tooth 1 Build 1 point 6 months ago

get the video card that does not run at 80C :)

Hybrid or water cooled is my suggestion, but not on your list

Forum Topic "RTX2080 Question(s)"

Tooth 1 Build 1 point 6 months ago

what brand/model did you pre-order?

Everything is available to pre-order before the ship date. But actual shipping is a different story. Guess you wait and see if all orders can be filled on that one date of Sept 20 :)

what did u pre-order?

Forum Topic "RTX2080 Question(s)"

Tooth 1 Build 1 point 6 months ago

pre-orders sold out, may not ship due to over selling

if you want to track specific video cards at specific web sites, use this. I did with 1080 search and it gives updates every 5 mins or so

https://www.nowinstock.net/computers/videocards/nvidia/rtx2080/

Forum Topic "RTX2080 Question(s)"

Tooth 1 Build 1 point 6 months ago

pre-orders "sold out"

Demand = sold out

if this is a repeat of the launch of 1080 the end of May 2017? or maybe 2016? I got want I settled for in August. 3 month wait checking daily. So I expect similar out of stocks/sold outs

Just go to newegg.com "sold out of pre orders" on most 2080's

https://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007709%20601321570

7 available, the rest, 33 out of stock.

And, those that did get a 1080 on day one jacked the price up 25-50% to sell at ebay for those that had to have one.

I want a 2080ti, but not hurry here

"2080 is already pre-ordered." what brand/model did you pre-order?

Forum Topic "RTX2080 Question(s)"

Tooth 1 Build -1 points 7 months ago

"I have a month until I get the new card"

you will not get the card on day one. You could wait for "months"

Forum Topic "A PARTS CHEAPER IN CHINA?"

Tooth 1 Build 1 point 7 months ago

I am sure it is much cheaper......but may not be what you expect as far as counterfeits. If you have specific parts you are looking for, make sure you know model numbers and serial number patterns from the manufacture.

Forum Topic "1080ti for rendering"

Tooth 1 Build 1 point 7 months ago

what is wrong with 970? What projects are you rendering?

What is your CPU for rendering?

Is the rendering speed related to the software, or your hardware?

Forum Topic "Deals on Instagram! #CoreGamingPro"

Tooth 1 Build 1 point 7 months ago

Topics 1

spam

Forum Topic "CCleaner"

Tooth 1 Build 2 points 7 months ago

This only advantage for the Professional CCLeaner is "enable system monitoring". This checked off will give you an alert to clean you system if you have X GB of junk to remove. I turn it off, as I use CCleaner right before every shutdown. I dont need this monitoring running in the background.

Second option is "enable browser monitoring" but like I said, I run ccleaner before system shut down

Forum Topic "CCleaner"

Tooth 1 Build 3 points 7 months ago

if you do manual cleaning, no need to get the paid version, get "FREE"

Forum Topic "Should I get a Gaming PC or Gaming Laptop?"

Tooth 1 Build 1 point 8 months ago

If for gaming, for sure a gaming PC. With laptop, you already have one strike against you vs PC

"I’ll be going from my mums to dads and back every week." If travel it would be setting up a pc every time. But if this travel is just in the near future, then pc setup not so much of a hassle vs a laptop.

Transporting a gaming pc you have to be careful. Laptop, is all portable

Velcade's Completed Build: Meshify and Coffee Lake

Tooth 1 Build 1 point 9 months ago

thanks, reviews are good

Velcade's Completed Build: Meshify and Coffee Lake

Tooth 1 Build 1 point 9 months ago

how do you like --->> Crucial - MX500 2TB 2.5" Solid State Drive?

This week, everyone dropped the price -$50, now $449. I am guessing a Father Days Special next week? I want one!!

Forum Topic "Arma Bundle with lots of DLC"

Tooth 1 Build 1 point 9 months ago

saw my email on arma 1-2-3........seems like a great deal

Forum Topic "Kaspersky"

Tooth 1 Build 1 point 9 months ago

didnt you have to make a kaspersky account? check your settings and enable your forgotten system

Forum Topic "Is McAfee a good antivirus"

Tooth 1 Build 1 point 9 months ago

I use to have McAfee, but I could never make an exception to a file or folder. So I went to bitdefender.

To me, bitdefender was lighter on my system

Forum Topic "Free video editing software"

Tooth 1 Build 1 point 9 months ago

I use it, but not free :)

Forum Topic "Tip of the day: You can change how much RAM Firefox uses."

Tooth 1 Build 1 point 9 months ago

didnt seem to change the number of "filefox.exe" running in the processes tab

default is 4 processes. When I launch firefox, I have 5 processes running when i set to 2 processes, I still have 5 processes running

Forum Topic "Help deciding gaming monitor - Aus for 1080TI"

Tooth 1 Build 1 point 12 months ago

explain to me why you need a $949 monitor at 1080 resolution?

are you stuck on the numbers, or have you looked at the picture yet?

949 = what in usd?

best quality for games

your thoughts on 4K?

Forum Topic "Triple Mount For 35""

Tooth 1 Build 2 points 12 months ago

try wide screen gaming, they have offers for forum members

http://www.wsgf.org/catalog/stands

are all 3 monitors 35"? that will be huge and heavy to support. ok, think you edited :)

http://www.wsgf.org/products/wsgf-ultimate-desk-stand-v2

Price: $349.00

The stand will fit most monitors up to 27" (16:9). It will also fit a 34" 21:9 ultra-wide, flanked by a pair of 24" or 25" panels.

Forum Topic "m.2?"

Tooth 1 Build 1 point 12 months ago

when you see reviews of m.2 drives, it is a stress testing. It is suppose to get hot during stress, normal usage, not hot at all

I have one sitting right below my video card, not hot at all even during hours of gaming

Forum Topic "Should Microsoft Office be included with Windows?"

Tooth 1 Build 1 point 13 months ago

hell no! Microsoft makes too much money selling professional edition for $400 USD!!

Forum Topic "Video Editing build for Sony Vegas"

Tooth 1 Build 1 point 13 months ago

The best computer for video editing

https://www.neweggbusiness.com/smartbuyer/buying-guides/find-best-computer-video-editing-budget/

System Requirements

Operating system: Microsoft® Windows 7 (64-bit), Windows 8 (64-bit) or Windows 10 (64-bit)
Processor: 2 GHz (multicore or multiprocessor recommended for HD or stereoscopic 3D; 8 cores recommended for 4K)
RAM: 4 GB RAM (8 GB recommended; 16 GB recommended for 4K)
Hard drive space: 1.5 GB hard-disk space for program installation; Solid-state disk (SSD) or high-speed multi-disk RAID for 4K media
Graphics card: Supported NVIDIA®, AMD/ATI® or Intel® GPU with at least 512 MB of memory (1 GB recommended for 4K and GPU-accelerated video processing)
Internet connection: Required for registration

http://www.vegascreativesoftware.com/ca/vegas-pro/specifications/

Forum Topic "Free - KING OF FIGHTERS 2002"

Tooth 1 Build 1 point 13 months ago

dont think I can run this game, tooooooo old lol

but thanks, didnt know GOG has free offers

Page
1
·
·
·
·